8-in Midrange Driver Speaker Exceptional performance through bass & mid-Range: Ideal for 2-way systems

8-in driver providing 94dB sensitivity & 100 Watts RMS (AES standard) power handling1.75-in high temperature copper voice coil wound on polyimide former for increased reliabilityAchieves optimal performance in compact enclosuresExceptional performance through bass & mid-Range: Ideal for 2-way systems

Nominal diameter: 203mm/8-in Power rating: 100 W rms Nominal impedance: 8 Ohms Sensitivity: 294dB Frequency range: 70-6000Hz Voice coil diameter: 45mm/1.75-in Chassis type: Pressed steel Magnet type: Ferrite Magnet weight: 0.88kg/31oz Coil material: Round copper Former material: Polyimide Cone material: Kevlar loaded paper Surround material: Cloth-sealed Suspension: Single Xmax: 33.5mm/0.14-in Gap Depth: 6mm/0.24-in Voice coil winding width: 13mm/0.51-inSmall Signal Parameters D: 0.17m/6.69-in Fs: 95Hz Mms: 17.53g/0.62oz Mmd: 15.60g/0.55oz Qms: 3.83 Qes: 0.50 Qts: 0.44 Re: 6.40 Ohms Vas: 12.6lt/0.44ft3 BI: 11.36Tm Cms: 0.17mm/N Rms: 2.62kg/s Le (at 1kHz)0.75mH Diameter: 208mm/8.19-in Overall depth: 99mm/3.54-in Cut-out diameter: 183mm/7.20-in Mounting slot dimensions: 9.5mm x 5.5mm/0.37in x 0.22-in Number of mounting slots: 4 Mounting PCD range: 195-199mm/7.68-7.83-in Unit weight: 2.3kg/5.1lb Packed Dimensions & Weight: Single pack size: W x D x H 230mm x 230mm x 110mm; /9.1in x 9.1in x 4.3-in Single pack Weight: 3kg/6.6lb Multipack: (140) size W x D x H 1070 mm x 850 mm x 860mm; /42.1in x 33.5in x 33.9-in Multipack: (140) weight435kg/959lbTested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power calculated on minimum impedance. Loudspeaker tested in free air.Measured on axis at 1W, 1m in 2π anechoic environment. Xmax: derived from: ( Voice coil winding width: - Gap Depth: )/2.