Competition Cams K12-206-2 High Energy Camshaft Kit Fits select: 1967-1975 CHEVROLET CAMARO, 1969-1976 CHEVROLET C10

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information. User 1 Catalog Warranty Catalog

Vans, pickups, 4WD and towing in 350c.i., good idle, strong mid-range torque. Single or dual engine with inboard/outboard drive for ski and economy. 1,200-5,200 RPM Operating Range 212/212 Duration at .050". 110 Degree Lobe Separation Angle. 0.44"/0.44" Valve Lift K Kits vary in their contents, but generally contain a camshaft, a set of lifters, valve springs, retainers, locks, valve seals, timing set, assembly lubricant, decals and instructions. Check description for more accurate listing of kit contents.