Polymer Tec Boston Boston Lens Case, 1 ea

Lens Case 1 case For use with rigid gas permeable contact lenses. User Friendly Design: Ridges in the lens well allow for easy removal of RGP lenses; Left and right caps clearly marked for your convenience; Designed for easy opening and closing. Other Benefits: Caps provide airtight seal to prevent leaking and keep lenses from drying out. Heavy-duty plastic construction. Made in USA. For storing fluoro silicone acrylate and silicone acrylate rigid gas permeable contact lenses during chemical disinfection. Before Initial Use: Clean the caps and wells of the lens case with a contact lens cleaner. Rinse with hot water and air dry. Do not use soaps detergents or other household cleaners. Place lenses in empty lens case and fill with fresh solution. Disinfect and store your lenses as instructed by the solution manufacturer. Always use fresh solution for soaking and storing lenses. After disinfection, remove lenses from lens case, reapply conditioning solution to wet the lenses for additional cushioning, if desired and insert. Thoroughly clean interior of lens case with hot water and air dry after each use. For Proper Lens Care: Replace lens case every (3) months for safe and healthy lens wear. At least once each week, clean the caps and wells of the lens case with a contact lens cleaner. Rinse with hot water and air dry. Data indicate that lens cases are a significant source of microbial contamination. Therefore, proper lens cleaning is essential for minimizing the risk of contact lens related eye infections. Lens cases should be replaced every three (3) months to avoid this potential source of contact lens contamination and ocular irritation. Do not use for heat disinfection. 1 case Rochester, NY 14609 800-333-4730 Bausch & Lomb Incorporated