Renogy - 800 Watt Monocrystalline Solar Kit w/ 6 Pcs 100W Solar Panel and 60A MPPT Charge Controller - Black

【Efficient Performance】 The Premium Kit will produce an average of 3.5-4kWh of electricity per day (Based on 5 hours of direct sunlight conditions). The bypass diode can ensure the panel has an excellent performance in a low-light environment and the TPT back sheet dissipates excess heat to ensure smooth output performance. The Module Efficiency can reach 17.8%. 【Solid Quality】 Advanced encapsulation material with multi-layered sheet laminations protects cells from physical damage or distortion, improving cell performance and providing a long service life. 【Ready to Install】 This Renogy Solar Kit includes the equipment necessary for building a new system, such as necessary cables, Z-brackets, and pre-drilled holes on the back frame of the panel, allowing fast and secure mounting. With the Rover Li 60A MPPT charge controller, the kit can meet your further power needs by adding more of the same solar panels; for example, a 24V system expandable up to 1600W. 【Stay Connected】 Easily monitor by your phone. The BT1 Bluetooth module can pair with Renogy DC Home App and transmits system operation data directly to your phone, the Bluetooth signal available up to 82ft. 【Full System Protection】 The Rover Li 60A MPPT Charge Controller has built-in protection to safeguard your systems, such as reverse polarity protection, overcharging protection, overload protection, short circuit protection, etc. This kit is also equipped with an In-line fuse and ANL fuse components, devised to add overcurrent protection on your charge controller and battery bank. Speicifications: RENOGY 100W MONOCRYSTALLINE SOLAR PANEL Maximum Power: 100W Maximum System Voltage: 600V DC (UL): 600V DC (UL) Open-Circuit Voltage (Voc): 24.3V Optimum Operating Voltage (Vmp): 20.4V Optimum Operating Current (Imp): 4.91A Short-Circuit Current (Isc): 5.21A Dimensions: 41.8 x 20.9 x1.4 in Weight: 14.1lbs/6.4kg ROVER LI 60A MPPT SOLAR CHARGE CONTROLLER Rated Charge Current: 60A Max. PV Input Power: 800W/12V; 1600W/24V; 2400W/36V; 3200W/48V Self-Consumption: 0.7W-1.2W Rated Load Current: 20A Max. PV Input Voltage: 150 VDC (25°C), 140VDC (-25°C) Dimensions: 285 x 205 x 102mm (11.22 x 8.07 x 4.00in) Weight: 7.9lbs Enclosure: IP32 Terminals: 25mm2 4AWG BT-1 BLUETOOTH MODULE Input Voltage: 5V Communication Range: ≤82ft Compatibel Models: All Renogy Controllers with RJ12 port Operation Temperature: -20°C~85°C (-4°F to 185°F) RENOGY SOLAR BRANCH CONNECTORS MMF+FFM PAIR Withstanding voltage: 1000V DC(TUV), 600V(UL) Protection Degree: IP67, mated Protection Class: Class II Temperature Range: -40°F to 194°F Insulation Material: PC/PA Package Includes: 8 x 100W Mono Solar Panel 1 x Rover Li 60A MPPT Charge Controller 1 x 8ft 4AWG Tray Cable 1 x 2ft 4AWG Fuse Cable 1 x 8ft 4AWG Tray Cable 1 x 15A Solar Connector and 60A ANL Fuse 1 x Renogy Solar Solar Branch Connectors MMF+FFM Pair 1 x BT-1 Bluetooth Module 8 x Mounting Z Brackets (Set)( 8 x (8 × Long Cap Bolts, 4 × Short Bolts, 4 × Spring Washers， 4 × Washers， 4 × Z Shape Solar Panel Brackets, 4 × Nuts）)