The Best Bulk Fluids - Car Wash Supplies and Chemicals 2026

1. Nanoskin SPEEDY BRITE Professional Wheel & Tire Acid Cleaner 1 Gallon - Car Wash Wheel Cleaning Spray For Car Detailing | Works with Wheel Brush & Tire Brush | Melt Away Rust, Brake Dust, Road Grim

Keeping your wheels clean isn't just about aesthetics—it’s essential for maintaining their longevity and performance. Brake dust, road grime, and mineral deposits can build up over time, leading to corrosion and permanent damage if not properly addressed. Nanoskin SPEEDY BRITE is a high-strength concentrated wheel and tire cleaner designed to tackle even the toughest contaminants with minimal effort. SPEEDY BRITE features a low pH organic acid formula, providing the power of traditional acid cleaners while eliminating the risks associated with harsh chemicals like hydrofluoric acid. This professional-grade solution works quickly and effectively to dissolve stubborn brake dust, grease, and oxidation, leaving wheels looking like new. The ability to dilute up to 4:1 allows users to customize its strength, making it ideal for both professional detailers and DIY enthusiasts. The cleaning process is effortless—simply spray the diluted solution onto cool, dry wheels, allow it to dwell for 30-45 seconds, and rinse thoroughly. The spray-on, rinse-off technology reduces the need for excessive scrubbing, saving both time and energy. It’s also body shop safe, ensuring compatibility with clear-coated, factory-painted, and chrome wheels, but it should not be used on polished aluminum or anodized surfaces. For best results, clean one wheel at a time to prevent drying, and always rinse thoroughly to avoid residue buildup. Whether you’re a professional detailer or an enthusiast looking for a fast and effective wheel cleaning solution, Nanoskin SPEEDY BRITE delivers professional-grade results with minimal effort. DIRECTIONS: Dilution Recommendations: General Wheel Cleaning: Dilute 4:1 (Mix 6 oz. of SPEEDY BRITE with 32 oz. of water). Dispensing Tanks: Mix 1 gallon of SPEEDY BRITE with 4 gallons of water in a 5-gallon dispensing tank. 1. Ensure wheels are cool to the touch before applying. Do not apply to hot or sun-exposed surfaces. 2. Dilute the product to the appropriate strength based on cleaning needs. 3. Spray the solution evenly onto dry wheels and tires, fully covering the surface. 4. Let it dwell for 30-45 seconds—do not allow the product to dry on the surface. 5. For stubborn dirt or brake dust, agitate with a wheel brush or soft-bristle brush. 6. Rinse thoroughly with water, ensuring all residue is removed. 7. Dry with a clean microfiber towel if necessary. Important Notes: ✔ Always test in an inconspicuous area before full application. ✔ Not for use on polished aluminum or anodized wheels. ✔ Do not allow product to dry on wheels. ✔ Use protective gloves and eyewear for safety.

✅CONCENTRATED: With dilution up to 4 to 1, just add 6 Oz. of Speedy Brite to a 32 Oz. spray bottle or add 1 gallon of the product to a 5 gallon dispensing tank. It provides a brightening power that quickly and effectively removes tough brake dust. ✅ POWERFUL BRAKE DUST & MINERAL DEPOSIT REMOVAL: A low pH organic acid blend effectively removes grease, road grime, oxidation, and brake dust from metal, paint, and hard surfaces. Lifts mineral deposits to help eliminate water spots. ✅ SPRAY-ON, RINSE-OFF FORMULA – MINIMAL SCRUBBING: SPEEDY BRITE’s smart acid technology dissolves tar, dirt, and grime with little or no scrubbing. Simply spray, let sit for 30-45 seconds, and rinse. ✅ SAFE FOR MANY FINISHES – BODY SHOP APPROVED: Free from hydrofluoric acid, this professional-grade cleaner is safe for clear-coated, factory-painted, and chrome wheels. NOT for polished aluminum or anodized wheels. ✅ EASY TO USE – PROFESSIONAL RESULTS: Apply only to cool, dry wheels. Dilute to required strength, spray on, wait 30-45 seconds, and rinse thoroughly. Clean one wheel at a time for the best results.

2. (6 pack) Eagle One PVD and Aluminum Wheel Cleaner, 23 oz

Wheel Cleaner, Liquid, 23 oz., Bottle, Clear, Liquid, pH 7.5, Removes Dirt and Grime, For Use With PVD and Aluminum Wheels Features pH: 7.5 Container Type: Bottle For Use With: PVD and Aluminum Wheels Color: Clear Container Size: 23 oz. Item: Wheel Cleaner Removes: Dirt and Grime Appearance: Liquid Type: Liquid

Item Type: Wheel Cleaner Brand: EAGLE 1 Manufacturer Part Number: 824334

3. Nanoskin IRON FREE Paint, Wheel and Glass Decontamination Fall Out Remover 55 Gallons - Removes Iron Particles in Car Paint, Motorcycle, RV & Boat | Use before Clay, Wax or Car Wash for Car Detailing

NANOSKIN IRON FREE is an acid-free, pH balanced paint & wheel cleaner / fallout remover. IRON FREE safely breaks down ferrous metallic contamination caused by automotive brakes, rail travel, and construction. Decontaminates delicate paint, plastic, chrome, glass, and alloy wheels. IRON FREE sprays on fluorescent green and turns reddish as it reacts with the iron particulates making it easier to remove. The thick & high foaming IRON FREE formula clings to vertical surfaces. Perfectly safe for use on all types of wheels when not used in direct sun or on a hot wheel. NOT FOR USE ON NUBUCK, SUEDE, FABRIC AND CONVERTIBLE TOPS.

✅ pH NEUTRAL FORMULA: Safe for all wheel types, gloss paint, clear coat finishes, polished metal, chrome, and glass. Avoid using it on your trim & metallic surfaces ✅ REMOVES FALLOUT AND BRAKE DUST: Can be used on your vehicle’s paintwork to dissolve fallout and brake dust with ease. This high-cling fallout removing product offers the safest and most effective method of removing potentially damaging fallout commonly found on your vehicle’s paintwork and rims. ✅ EFFECTIVE CORROSION INHIBITOR: Specifically formulated to remove fallout and brake dust, and at the same time boasts a corrosion inhibitor plus, which is an additive designed to combat the effects of acid rain. ✅ HIGH-CLING FORMULA: A gel-like formula that will cling to vertical surfaces so you can be sure that wherever you apply it, it will provide an effective removal of iron particles, brake dust and general fallout. ✅ EASY TO APPLY: Simply rinse your vehicle down and spray Iron Free to any painted surfaces, and watch as fluorescent yellow foam turning reddish as it loosens and removes harmful iron deposits from your finish.

4. Nanoskin HYDRO EXPRESS Hydrophobic Spr ay Polymer - 1 Gallon

Nanoskin HYDRO EXPRESS is technically a spr ay polymer sea lant. Through the use of advanced hydrophobic polymer formula, Nanoskin has created a spr ay polymer that actually repels water, dissipates static, and adds additional protection to your finish. HYDRO EXPRESS can also be used on glass, chrome, and plastic. The spr ay dries crystal clear on any surface and enhances reflections on shiny materials, like chrome wheels and trim. It 's so easy and you can detail and protect a full size car in less than 10 minutes. NOTE: HE will continue to cure for up to 24 hours. Directions: • Shake well. Use only on clean, cool pai nt and out of direct sunlight. • Mi st HYDRO EXPRESS onto one section at a time. • Quickly spread product with clean dry microfiber towel. • Turn to a dry portion of the towel, then wipe dry.

Key Features • The most advanced spr ay polymer • The missing link between washing and wa xing • A spr ay polymer that actually repels water • Lasts up to 3 months • Enhances reflections on shiny materials • May also be used on glass, chrome and plastic

5. RINSE FREE Express Wash (Dilution Ratio: 127:1) [NA-RFE128], 1 Gallons

RINSE FREE Rinse Free Express Wash is formulated to quickly and efficiently clean in direct sunlight without rinsing with water. It helps prevent scratching of paintwork, metals, and plastics. This is an outstanding product for people looking for a way to clean their vehicles when they cannot perform a traditional car wash. City dwellers or people living in water-restricted areas will get a lot of use out of RINSE FREE. It 's also fantastic for car washing in the garage during the winter. Dilution: 127: 1 (1 Oz. per Gallon)

Biodegradable formula is Hyper concentrated No need to rinse with water Dilution: 127: 1 Rinse Free

6. Nanoskin SPEEDY SHINE Exterior Trim, Bumper & Tire G el - 1 Gallon

Nanoskin SPEEDY SHINE Exterior Trim, Bumper & Tire G el is the next generation shining agent from Nanoskin. The thick, water-based suspension formula provides a high gloss shine on all exterior trium, bumper, tires and wheel wells. The ultra safe formula contains no petroleum distillates or VOCs, which are known to crack vinyl and rubber. SPEEDY SHINE 's safe, water-based formula delivers premium protection and an attractive shine. Directions: 1. Clean surface before application. 2. Brush or sponge on and let dry to a beautiful shine.

Key Features • Non-sling formula • Imparts unbeatable gloss • For exterior use only

7. Nanoskin BUBBLE BATH Car Wash and Shine Shampoo - 1 Gallon

BUBBLE BATH is a thick, super concentrated, high foaming car wash soap. Excellent for hand or automatic washing systems. The thick foam and water sheeting action washes away dirt and grime, while it rinses sparkling clean and streak free. Environmentally friendly and cost effective. Dilutes 1 part BB to 128 parts water. General dilution is 1 ounce per gallon of water. For hand washing, dilute 1 oz of BB to 1 gallon of water. For automatic car wash systems, dilute 1 gallon of BB to 10 gallons of water. Then adjust metering system for maximum foam and cleaning performance Dilution: Hand Washing 127 : 1 EVERGREEN Shampoo Gun 127 : 1 Automatic Car Wash Systems 10 : 1 Directions: For Hand Washing - 1. Mix 1 oz per gallon of water. 2. Rinse surface with water to flush away loose dirt. 3. Wash and rinse in sections. 4. Begin with the roof, and work the suds down to the hood, trunk and sides. 5. Rinse with clean water. 6. Dry with clean and soft towels. For Automatic Car Wash Systems- • Dilute 1 gallon of BB to 10 gallons of water. • Adjust metering system for maximum foam and cleaning performance.

Key Features • Super-concentrated • Washes away dirt & grease • Rinses clean • Will not strip wa x • Automatic and Hand car wash systems

8. Nanoskin GREASE FREE Power Clea ner and Deg reaser - 1 Gallon

GREASE FREE is a concentrated water base power clea ner and deg reaser. It dilutes with water and cleans a variety of surfaces. For engines and greasy door jams, dilute one part of GF with three parts of water. For medium duty degreasing, dilute one part of GF with nine parts of water. For general cleaning, dewa xing or other light duty work, dilute one part of GF with nineteen parts of water. Safe for most under-the-hood rubber and plastic parts. Great for stubborn spots and stains. Dilution: Heavy Duty Degreasing 4 : 1 Medium Duty Degreasing 9 : 1 General Cleaning, Dewa xing 19 : 1 Directions: • Dilute with water to designed strength. • Spr ay or wipe on surface. • Brush or wipe as needed. • Rinse surface with water.

Key Features • Water Based Formula • Removes grease, grime and dirt • Cleans engines, trunks, door jams, wheels, tire and rims • Safe for most under-the-hood rubber and plastic parts

9. Nanoskin HAPPY BUG Bug Remover - 1 Gallon

Formulated using advanced, clear-coat safe surfactants, Nanoskin HAPPY BUG Bug Remover is a fast-acting clea ner that annihilates pesky bug guts before they cause damage to your vehicle 's delicate finish. If you live in a region that 's plagued by the infamous love bug, you 'll be able to remove them as well! HAPPY BUG also works great on tar, road grime and heavy road films. HAPPY BUG is a concentrated formula that can be diluted up to 9:1 with water. Helpful Tips: In hot arid climates or weather, it is best to dilute the bug remover a little more to the lean end of the recommended ratios and apply a greater volume of the product over a larger area. This will help cool the greater surface and allow more time for the product to act on the bugs. If too little diluted product is spr ayed on just a small area of a hot surface, it can dry too quickly and not be as effective. Dilution: 4:1 ~ 9:1 Directions: Bug removal on exterior surfaces- • Spr ay diluted HAPPY BUG directly onto surface and allow it to dwell for 30 seconds. • Wipe the area clean with a soft microfiber towel. For easy love bug removal, use a bug scrubber. HAPPY BUG can be diluted 9:1 with water for bug removal on well-maintained vehicles. Tar removal- • Dampen a microfiber towel with water. • Spr ay HAPPY BUG directly onto surface and microfiber towel. • Firmly hold microfiber towel on surface for 1 minute. • Gently wipe clean. Dry surface with a clean, dry microfiber towel. • For stubborn road tar, a second application may be necessary. Pre-wash- Add 2 ounces directly into wash bucket and wash as you normally would.

Key Features • Annihilates pesky bug guts • Advanced, clear-coat safe surfactants • Safe on pai nt, glass chrome and plastic trim

10. Nanoskin WATERLESS Waterless Wash (Dilution Ratio: RTU ~ 4:1) - 1 Gallon

WATERLESS is a water-based, enviro-friendly blend of wetting agents, emulsifiers and prot ectants. It emulsifiers, lifts and remove bugs, dirt and light to medium surface contaminants. Not for excessively so iled, muddy or caked on dirt. Designed for all exterior surfaces. Works on all pai nt, metal, plastic, chrome and glass. Does not smear or streak. Perfect shine in seconds. Directions: • Spr ay on surface and let set for 10 seconds. • Wipe off with a clean, dry terry cloth or microfiber. • For difficult spots, repeat and let soak on surface longer to work, then wipe off. • When towels are so iled, use a clean towel.

Key Features • Spr ay-Wipe-Shine-Protect • Removes bugs, dirt, road grime & contaminants • Designed for pai nt, glass, chrome & plastic