The Best Lighting Stands and Trusses 2025

1. Musician's Gear Lighting Stand Black

Holds 4 lights and adjusts from 60"-144" tall. Tubular aluminum alloy construction.

Durable black tubular aluminum alloy stand with crossbar

2. Nady SPST-1AX Tripod Speaker Stand - Adjustable heavy-duty tripod speaker stand, supports speakers up to 150lbs

Nady SPST-1 Adjustable All-Metal Speaker Stand

Nady SPST-1 Adjustable All-Metal Speaker Stand

3. On-Stage LS7730 Lighting Stand w/ Truss

A low-cost alternative in lighting stands that can hold a total of 16 par cans! Includes two tripod base lighting stands with 3 section shafts and T-bars. T-bars hold 4 par cans each. Also includes two 5' Truss sections, holding 4 par cans each. Easy assembly with screw on plastic brackets and thumb screws which allow for height adjustments. Use only for static lights. Weight Capacities: Truss- Maximum 80lbs Stand-Maximum 110lbs each Maximum Total System Capacity- 200lbs

Color: Black Powder Coat Finish Truss Weight Capacity: 80 lbs Stands Weight Capacity: 120 lbs each Total System Weight Capacity: 200 lbs Max Height: 10.75' Base Spread: 48" Construction: Hi-grade aluminum

4. Celestion 10-in Mid/bass driver 8 ohms w/Kevlar loaded paper

Celestion 10-in Mid/bass driver 8 ohms w/Kevlar loaded paper

10-in Mid/bass driver delivering 99dB sensitivity and 300Wrms (AES standard) Power handling FEA optimised magnet assembly and suspension delivers highly symmetrical cone movement leading to exceptionally low harmonic distortion Balanced Airflow Venting (BAV) increases airflow to provide enhanced cooling Twin demodulation rings reduce flux modulation, minimizing electromagnetic distortion M-roll surround provides progressive excursion control, yielding a smooth response even at extremes of frequency range Nominal diameter: 254mm/10in Power rating: 300Wrms Continuous power rating: 600W Nominal impedance: 8 Ohms Sensitivity: 99dB Frequency range: 60-5,000 Hz Voice coil diameter: 64mm/2.5 in Chassis type: Cast Aluminium Magnet type: Ferrite Magnet weight: 1.7 kg/60oz Coil material: Edgewound copper clad aluminium Former material: Glass fibre Cone material: Kevlar loaded paper Surround material: Cloth-sealed Suspension: Single Xmax4: 2.5 mm/0.1 in Gap depth: 8mm/0.31 in Voice coil winding width: 12.5 mm/0.49 in Small Signal Parameters D: 0.21 m/8.27 in Fs: 54.8 Hz Mms: 37.03 g/1.31 oz Qms: 2.338 Qes: 0.299 Mmd: 32.51 g/1.15 oz Qts: 0.265 Re: 5.15O Vas: 38.63 lt/1.36 ft3 BI: 14.82 Tm Cms: 0.23 mm/N Rms: 5.46 kg/s Le (at 1kHz): 0.57 mH Mounting Information Overall diameter: 265 mm/10.43 in Overall depth: 119 mm/4.69 in Cut-out diameter: 230.8 mm/9.1 in Mounting slot dimensions: 8x6.5 mm/0.3x0.25 in Number of mounting slots: 8 Mounting PCD range: 244.5-247 mm/9.63-9.73 in Unit weight: 4.9kg /10.8 lb Packed Dimensions Weight Single pack size W x D x H: 306 mm x 306 mm x 155 mm: /12 in x 12 in x 6.1 in Single pack weight: 5.5kg /12.1 lb

5. Jamstands JS-TS50 Speaker Stand

Ultimate Support Systems Jamstands JS-TS50 Speaker Stand

Ultimate Support Systems Jamstands JS-TS50 Speaker Stand Designed to provide the highest performance from your speakers High quality aluminum construction ensure permanence and durability

6. 12' LIGHTING STAND WITH 1 CROSS BAR IN BLACK

Our LTP2 black high-quality 12 ft. aluminum/steel constructed tripod lighting stand comes with one T-bar with support bars and hanging bolts. Brand:-Odyssey 12' LIGHTING STAND WITH 1 CROSS BAR IN BLACK Extends Vertically from a 6' to 12' High Maximum Height Including Top T bar is 12.5' Folds up for Easy Transport and Storage Out of the Box Folded Dimensions: 55" x 5.5" x 5" Legs Spread To a Maximum of 52" Wide Legs and Bottom Tube Diameters are 1"1/2" Middle Vertical Tube Diameter is 1"3/8" Top Vertical Tube Diameter is 1 "1/4" Top T bar is 48" wide with a 1"1/2" Diameter Tube T bar Includes Four Hanging Bolts and Support Bars for Added Stability Includes Vertical Bar Support Safety Pin Maximum Load Capacity is 80 lbs. Evenly Distributed ItemNumber#LTP2

Extends Vertically from a 6' to 12' High. Maximum Height Including Top T-bar is 12.5'. Folds up for Easy Transport and Storage. Out of the Box Folded Dimensions: 55" x 5.5" x 5". Legs Spread To a Maximum of 52" Wide. Legs and Bottom Tube Diameters are 1-1/2". Middle Vertical Tube Diameter is 1-3/8". Top Vertical Tube Diameter is 1-1/4". Top T-bar is 48" wide with a 1-1/2" Diameter Tube. T-bar Includes Four Hanging Bolts and Support Bars for Added Stability. Includes Vertical Bar Support Safety Pin. Maximum Load Capacity is 80 lbs. Evenly Distributed. Each LTP2 Retail Box Includes: (1) Odyssey LTP2 12' Tall Black Lighting Tripod Stand with Top T-Bar (4) Hanging Bolts (4) Support Bars (1) Set of Vertical Pole Safety Pins

7. Odyssey LTMTS1PRO Pro DJ 10 FT Portable Stage Crank-Up Lighting Truss System

Our portable 10' span aluminum/steel constructed **LTMTS1PRO** crank truss sytsem makes it that much easier to get your lighting up and running in no time. Utilizing an ingenious internal gear system rather than cables not only makes it safer to use but makes for worry free use for years and years. Full cranking height reaches 8.5 feet and can handle an evenly spread load of 200 lbs. For transporting your truss system, see the BLTMTS transport bag. On top of offering you the Odyssey **LTMTS1PRO** at a great price, we provide free ground shipping on all orders. VMInnovations is an authorized Odyssey dealer that sells new, warranted products! Please see our other listings, we offer a wide variety of Odyssey and Pro DJ products.

Brand New Odyssey **LTMTS1PRO** Light Crank Truss System! Capacity: 200 lbs 10' Wide, 8.5' Tall Approximate Weight: 50 lbs UPC barcode: 807822098723 [User Guide][1] Product Condition: Brand New Part Number: **LTMTS1PRO** 1 Year Warranty [1]: http://www.odysseygear.com/userguide/ltmts1pro_userguide.pdf Brand New Odyssey **LTMTS1PRO** Light Crank Truss System! Capacity: 200 lbs 10' Wide, 8.5' Tall Approximate Weight: 50 lbs UPC barcode: 807822098723 [User Guide][1] Product Condition: Brand New Part Number: **LTMTS1PRO** 1 Year Warranty [1]: http://www.odysseygear.com/userguide/ltmts1pro_userguide.pdf

8. Odyssey Lighting Tripod and Truss Package

This light support package includes two Odyssey LT-P2 Tripod Lighting Stands made from sturdy black aluminum that extend to 12', as well as one Odyssey LTMTS1-PRO Lighting Truss System, which is safer to use than cable-based systems. Full cranking height reaches 8-1/2' and can handle an evenly spread load of 200 pounds. It has a 10' span and holds up to 8 lights.

Includes 2 LTP2 Tripod Lighting Stands that extend to 12' and one LTMTS1-PRO Lighting Truss System with an internal gear system that's safer than cable-based systems The truss stand cranks to a height of 8-1/2' Rubber feet help keep them stable

9. Odyssey LT-P2 Tripod Lighting Stand - Pair

The Odyssey LT-P2 Tripod Lighting Stand is made from sturdy black aluminum and steel, and extends to 12'. Includes two stands. 80-lb. capacity.

2 high-quality black aluminum stands extend to 12' Folds for easy transport 80-lb capacity

10. Musician's Gear Lighting Stand With Truss Black

This package includes two T-bar lighting stands and one 9' truss. Each stand holds up to four lights and adjusts from 60"–144" tall. The truss bar can hold up to eight lights.

A reliable stand at a steal of a price!