Yamaha Tour Custom 5-Piece Fusion Shell with Suspended Ocean Blue

The Yamaha Tour Custom 5-Piece Fusion Shell Pack includes a 22" x 17" kick drum; 10" x 8 and 12" x 9" mounted toms; 14" x 12" suspended floor tom; and a 14" x 6" Black Onyx snare drum; TH-945 triple tom holder, CL-945 tom ball clamp, and CSAT-924 cymbal stand attachment. Cymbals and hardware not included. Air Seal System All Yamaha wood drums have one thing in common. Yamaha's craftsmen create every drum shell using their exclusive staggered diagonal seam Air Seal System just as they have since 1967. Each two or three-ply master ply is cut to length to very precise tolerance with a diagonal cut on each end. The diagonal seam in the drum shell will not separate, eliminating the need to fill gaps in the bearing edge with filler putty. These plies have glue applied and are then put into the mold by hand, one master ply at a time. The craftsman then inserts an air bag into the mold and inflates it, clamping the shell with even pressure 360 around. This process creates a drumshell that is strong and stays cylindrical for many years. 100% maple shell Tour Custom drum shells are 100% maple. The bass drum is 7-ply 7mm and has a warm, deep tone; the toms are 6-ply 6mm, with lots of warmth and resonance and have a wide tuning range. 60 bearing edges All Tour Custom drums have 60 R2 bearing edges. This is something new for Yamaha on a maple shell drum set. This bearing edge has a rounder profile so that there is more shell to head contact. This gives the drums clarity in the low-end fundamental and added warmth. Bass drum spurs Sturdy, yet simple in design; the bass drum spurs hold the bass drum firmly in place even under heavy playing. They are height adjustable using a drum key, and there are steel spikes that can be exposed when extra hold is needed. They fold up compactly for transport and are marked with angle indicators so that you can set them up the same every time. YESS tom and floor tom brackets All Tour Custom toms and floor toms use the Yamaha Enhanced Sustain System(YESS). The toms have a mount attached to the shell at the nodal point by two bolts. This system allows the drum shell to vibrate freely for maximum sustain without restricting with where the placement of the drums. The floor tom brackets are small, minimal contact mounts that are located at the nodal point. They hold the legs securely in place without restricting the vibration of the shell. Ball clamp and triple tom holder Tour Custom drum sets includes the TH-945 triple tom holder with Yamaha's tom ball clamp that gives you 360 rotation. The ball, made of a super-hard resin, is held in place by a single bolt making angle adjustments on the toms quick and easy. The toms lock firmly in place at virtually any angle you want. This versatile tom holder lets you mount any combination of up to three toms and/or cymbals by using either the standard or the long version of our tom ball clamp and CH model cymbal booms. Cymbals and hardware not included.

Designed with 100% maple shells and Yamaha's exclusive Air Seal system 22" x 17" kick, 10" x 8 and 12" x 9" mounted toms, 14" x 12" suspended floor tom, 14" x 6" Black Onyx snare Hardware and cymbals not included