12 JBL CONTROL 85M 5.25" Commercial Outdoor Inground/Onground Landscape Speakers

Package Includes: (12) JBL CONTROL 85M 5.25" Commercial 70v Outdoor Inground/Onground Landscape Speaker Features: Components: 5¼” highly weather-resistant driver ¾” soft-dome highly weather-resistant tweeter 80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer Tough polyethylene highly weather resistant enclosure Fully isolated center chamber for wiring protection High fidelity sound character with broad frequency range of 55Hz - 18kHz Specifications: Frequency Range (-10dB): 55 Hz – 18 kHz Power Rating: 160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs) Transformer Taps: 70V: 30W, 15W, 7.5W & 3.8W 100V: 30W, 15W, 7.5W Frequency Response (±3 dB): 65Hz - 16 kHz Maximum Input Voltage: 23.3 V Sensitivity: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz) Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground). Directivity Factor (Q): 2.2 Directivity Index (DI): 3.4 dB Maximum SPL (1m): 105 dB Impedance: 8Ω (at 8Ω setting) Insertion Loss: <1.0 dB at any tap setting Thru Setting: 8Ω nominal Crossover Type: 2nd Order LPF on LF and 2nd Order HPF on HF Recommended Protective High-Pass: 65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct LF Driver: LF: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround. HF: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome. Enclosure: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated. Grille: Powder coated stainless steel. Outdoor Capability: IP-56 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated. Safety Agency: UL1480, Transformer UL Recognized per UL1876, ROHS compliant. Input Connectors: Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section). Wiring: Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS). Colors: Hunter Green, RAL6018 Dimensions (H x W x D): 432 x 291 x 291mm (17 x 11.5 x 11.5 in.) Net Weight (each): 5.5 kg (12 lb) Shipping Weight: 7.3 kg (16 lb) Included Accessories: (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver Installer-Supplied Required Tools: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure. Optional Accessories: 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.

Package Includes: (12) JBL CONTROL 85M 5.25" Commercial 70v Outdoor Inground/Onground Landscape Speaker Features of CONTROL 85M: Components:. 5¼” highly weather-resistant driver. ¾” soft-dome highly weather-resistant tweeter. 80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer. Tough polyethylene highly weather resistant enclosure. Fully isolated center chamber for wiring protection. High fidelity sound character with broad frequency range of 55Hz - 18kHz Specifications: Frequency Range (-10dB): 55 Hz – 18 kHz. Power Rating: 160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs). Transformer Taps: 70V: 30W, 15W, 7.5W & 3.8W 100V: 30W, 15W, 7.5W. Frequency Response (±3 dB): 65Hz - 16 kHz. Maximum Input Voltage: 23.3 V. Sensitivity: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz). Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground).. Directivity Factor (Q): 2.2. Directivity Index (DI): 3.4 dB. Maximum SPL (1m): 105 dB. Impedance: 8Ω (at 8Ω setting). Insertion Loss: <1.0 dB at any tap setting. Thru Setting: 8Ω nominal. Crossover Type: 2nd Order LPF on LF and 2nd Order HPF on HF. Recommended Protective High-Pass: 65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct. LF Driver: LF: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround. HF: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.. Enclosure: LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated..