SUNLU 3D Filament Storage Dry Box, Filament Dryer Box Dehydrator, SUNLU 3D Filament Housing Compatible with 3mm 3D Filaments, Spool Holder

Function: Dryer and Storage Box: The SUNLU dry box is specifically designed for drying 3D printer filament, designed to remove moisture from a filament spool. It can keep the 3D filament dry during a print job and can be used to dry the filament for storage. Heating, Rotation and Constant Temperature: The storage box will keep heat up to your preset temperature and will continue to operate until the preset time. The SUNLU box has two built-in rotating shafts that allow the filament to rotate continuously in a dry hot box to remove moisture. Simple but effective: the filament dryer box is very easy to use, it has a lot of functionality even with just two buttons, such as temperature and time, it loads the data of the current temperature and the current target temperature. 【Setting temperature and time】 The dryer box is preset to run for 6 hours at 122.0 ° F which should be compatible with almost any material of any filament diameter. But you can click the buttons to reset the temperature between 95.0 - 131.0 ° F, or press the left button to reset the working time between 0 - 24 hours.

1. LCD Display: 2-inch LCD display screen, displaying temperature and time. 2.Dual temperature probes to measure the temperature of the cabinet and heating plate. 3.Wrapped baking, more uniform heating, better baking effect. 4.Heating temperature adjusted: which is convenient for customers to use at different temperatures (35℃~55℃ range) 5.Timing function: set heating timing, set time, enter the standby state, safe and secure Parameter Name: SUNLU 3D Filament Drying Box Quantity: 1* Drying box, 1* plug Color: White drying box ①【Remove Excess Moisture】→3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU dry box can remove the excess moisture, keep the filament dry. ②【Fully assembled and easy to use】→It's simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. ③【Simple but Effective】→The print quality will be better if using dried filament, the surface smoother, layer adhesion increased. It can help if you live in a humid temperature zone. ④【High Compatibility】→The adjustable temperature(time) range is 35-55℃(0-24hours), the SUNLU dryer can bake 1KG any type of filament at a designated temperature for hours. ⑤【Dry During 3D Printing】→Dust-free, moisture-free. The filament dryer is a great addition to 3d printer, it can keep the filament dry during 3d printing, no more brittle PLA, PETG, ABS filament.