Dual Pro PS3 Battery Charger 3 Bank 45 Amps

The Dual Pro Professional Series 3 Bank Charger has three 15 amp banks. It is 22.50 pounds. It has reverse polarity protection, temperature control, independent outputs and quick logic microprocessor capabilities. It is waterproof.The #1 choice of over 50 boat manufacturers and the pro fishermen on the B.A.S.S. and FLW tournament trails. These chargers are totally waterproof and shut off completely after charge. No trickle charge. Return to charge maintenance mode. They are temperature compensated to assure you fully charged batteries under all atmospheric conditions. Separate chargers in every bank enable each battery to be analyzed, charged and maintained individually to ensure peak performance. No installation restrictions. Ignition protected ( Coast Guard 33 CFR183.410) Meets FCC Part 15. CE Approved.Fully Waterproof.Independent Outputs.Fully Automatic/ Complete Shut-Off.Overcharge Protection.True Reverse Polarity Protection.Return to Charge Maintenance Mode.No Installation Restrictions.Over Current Protection.Temperature Compensated Charging Technique.Short Circuit Protection.LED Readouts.Meets FCC 15 Parts A and B.Identified Charge Cables.Advanced Microprocessors.CE Approved "ISO 8846-Marine".Ignition Protected ( Coast Guard 33 CFR183-410.AGC 30 amp fuse..AC Input: 115 VAC; 60 Hz.Total Output: 45 Amps.Amps Per Bank: 15.Battery System: 12 Volt, 24 Volt, 36 Volt - Up to three (3) single 12 volt batteries, 15 amp charge per battery.Cord Length: AC Cord: 3 foot, DC Cord: 5 foot.Dimensions: 10"L x 16"W x 12"H.- SKU: SPTMN2359

Approved for Wet Cell and AGM batteries Models also available for Gelled Electrolyte batteries Designed for use in fresh and saltwater Dependable, rugged, waterproof construction DeltaVolt Intuitive charging technology Independent outputs Fully automatic / multi stage charging Zero spark technology Battery maintenance mode On-board diagnostic codes Temperature compensated Advanced microprocessor controlled Battery systems available: 12V 48V LED lights indicate the state of charge Reverse polarity protected No installation restrictions FCC 15 Parts A & B interference complaint DC charge cabels = 5ft. AC power cord = 3ft. approved and meets ISO 8846 Marine standards Ignition protected ( Coast Guard 33 CFR 183.410)