Blackfire Automotive Paint Cleaner 128 oz.

Blackfire Paint Cleaner visually reduces and removes swirl marks while creating a wet-look shine. It removes old waxes, sealants, and cleans the paint's surface to prep the surface for a shiny coat of wax or paint sealant. Used before your LSP (last step product), Blackfire Paint Cleaner improves the gloss and clarity of the finish. Polishing is must for a show car finish! Blackfire Paint Cleaner is a non-abrasive polish and glaze combination. Use Blackfire Paint Cleaner to remove old wax, clean the top paint surface, visually reduce swirls and deepen the paint's gloss prior to wax or sealant application. It wets the surface to create the illusion of the paint being under water. Blackfire Paint Cleaner helps hide minor swirls and scratches without removing any paint or clear coat. It \"rounds-over\" the leading edge of minor swirls which robs sunlight of a sharp edge to cause a reflection. While this visually reduces swirls, it does not remove them. This is a great product to use on a vehicle in good condition with very few swirls. Blackfire Paint Cleaner beautifies all colors of any paint with or without a clear coat finish. This polish can be used on single stage or conventional paint, base coat, clear coat finishes. It can also be used on nano, ceramic-particle clear coats or scratch resistant clear coats, but is not aggressive enough to hide minor swirls and scratches. Blackfire Paint Cleaner is 100% VOC FREE!

Directions for use: Apply a quarter size amount of product to a dry applicator pad and wipe on the surface using small circular motions. Apply to one section at a time (i.e. 1/2 hood, fender, etc.). Allow light film to dry. Buff residues with a clean Cobra MicrofiberTowel. If using a dual-action machine polisher like the Porter Cable 7424XP, apply with a polishing pad. Set the Porter Cable's speed control between 3-1/2 and 4. Buff off residues with a clean microfiber towel.