2 Hifonics TPS-CP80 8" 180W Wakeboard Tower led Speakers for Polaris RZR/ATV/UTV

Price is for (2) Hifonics TPS-CP80 8" Marine Wakeboard Tower LED Speakers Totaling 360 Watts! Hifonics marine and powersports certified high end 8 inch Wake Tower Coincident Mounted Compression Horns featuring UHS (ultra-high sensitivity) Technology and Wavelength Transparent Acoustic Lenses with a polypropylene cone. Packaged as single units (Black). Features: Hifonics TPS-CP80 8" 180w Marine Wakeboard Tower LED Speaker 4 Boat/ATV/UTV/RZR Marine Grade Protection: Marine/Powersports Certified - Protected for water and dirt. UV protected against sun fade. Tweeter Dome Material: 1 Inch Pure Titanium Compression Diaphram - Very smooth musical response, with very high output with minimal required amplifier power Compression Horn: Coincident Mounted Compression Horn - Overall volume is improved as much as +5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone Surround: Natural Butyl Rubber - Remains musical in all weather. Does not stiffen in cold. Cone: 6.5 inch Composite Poly Cone - Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame Voice Coil Former: High Temperature Voice Coil and Former - Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight. Spider: Water resistant spider - Woven fiber composite spider to stabilize the cone and voice coil in all musical situations. Cooling System: Front and Rear Venting - Air passes through the spider and back plate to exchange air over the voice coil. Crossover Type: 12dB Butterworth - Smooth transition from high to lower frequencies remain musicial and not harsh or distorted Frame:Composite ABS and glass fiber frame - Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker Motor: High Energy Y30 Motor assembly - High energy strontium ferrite magnet for higher output with minimal amplifier power Grills: Composite - UV treated against sun fade and waterproof Marine Certified: YES - Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand. IPX67: YES - Tested to the highest Marine and Motorsports standards for resisting the elements Tweeter Material: Titanium Dome Tweeter - Very smooth musical response, high output with minimal required amplifier power Marine Certified Crossover: Marine Certified Crossover - Conformal Coated, Butterworth 12dB per octave crossover with PTC (Positive Thermal Coefficient) tweeter protection Illumination: YES - Limitless color choices with color on, off, strobe and programmed “light shows” possible. Optional N1-RC required for control of lighting systems and to sync multiple illuminated speakers. Pre-programmed demo mode included on all lighted systems. Specifications: RMS Power Handling (CEA426B): 90 Peak Power Handling (CEA426B): 180 Speaker Impedance: 4 Ω Frequency Response +/- 10dB: 20Hz-24kHz Frequency Response +/- 3dB: 48Hz - 27kHz Sensitivity (1 watt/1 meter): 92dB Tower Length: 11.2" (286mm) Hang Height: 9.035" (229.5mm) Height: 8.4" (215mm) Width: 8.4" (215mm) Certifications: IPX6/7, Conformal Coated, UVA Certified, CEA426B Dimensions: 12 X 10.25 X 15.69 inches (30 x 26 x 39.6 cm) Weight: 8.1 lbs (3.6 kg)

Features: Hifonics TPS-CP80 8" 180w Marine Wakeboard Tower LED Speaker 4 Boat/ATV/UTV/RZR. Marine Grade Protection: Marine/Powersports Certified - Protected for water and dirt. UV protected against sun fade.. Tweeter Dome Material: 1 Inch Pure Titanium Compression Diaphram - Very smooth musical response, with very high output with minimal required amplifier power Compression Horn: Coincident Mounted Compression Horn - Overall volume is improved as much as +5dB over conventional speakers, Wavelength Transparent Acoustic Lens improves midrange frequencies through the cone. Surround: Natural Butyl Rubber - Remains musical in all weather. Does not stiffen in cold.. Cone: 6.5 inch Composite Poly Cone - Water resistant composite polypropylene cone with temperature stable Butyl rubber surround mounted on a lightweight composite frame Voice Coil Former: High Temperature Voice Coil and Former - Voice coil is high temperature copper, wound on a Kapton former which allows the voice coil to handle more power while remaining light in weight.. Spider: Water resistant spider - Woven fiber composite spider to stabilize the cone and voice coil in all musical situations.. Cooling System: Front and Rear Venting - Air passes through the spider and back plate to exchange air over the voice coil. Crossover Type: 12dB Butterworth - Smooth transition from high to lower frequencies remain musicial and not harsh or distorted. Frame:Composite ABS and glass fiber frame - Composites add strenth to the frame without adding distortions or harmonics that can affect the tonal quality of the speaker. Motor: High Energy Y30 Motor assembly - High energy strontium ferrite magnet for higher output with minimal amplifier power. Grills: Composite - UV treated against sun fade and waterproof Marine Certified: YES - Longer life against harsh conditions. Protected against sun fade with UVA paint coating. Conformal coated crossover components protect against fresh and salt water spray as well as dust and sand.. IPX67: YES - Tested to the highest Marine and Motorsports standards for resisting the elements. Tweeter Material: Titanium Dome Tweeter - Very smooth musical response, high output with minimal required amplifier power