2-Stroke Petrol Earth Auger Post Hole Digger Borer 4/6/8"Bit Eextension Bar 1460W Auger Digging Drill 52cc

The traditional way of digging a hole with a hoe is time-consuming, labor-intensive, and prone to backache at the end of the process. Advancement in technology has brought about labor-saving and professional digging equipment that is ready to liberate you from the hassle of manual digging. Equipped with a powerful fuel engine, this auger post hole digger digs more efficiently than manual trenching, saving valuable time and making digging a pleasure.2.3HP 52CC Gasoine Post Hole Digger Earth Auger 4"/6''/8" Bits w/ Extension Bar Starting Method 1. Turn on the switch. 2. Before each start, press the oil bubble to suction oil into the oil pipe. 3. When the cold machine starts, close the damper switch first. 4. When ignition is heard, pull the start handle 5-8 times. 5. Open the damper switch. Drill Installation Steps 1. Connect the drive shaft. 2. Insert the bolt. 3. Put the pin to lock it. Specification Material: PP, Steel, Rubber, Aluminum, Iron, Carbon Steel Color: Orange, Black Engine Type: Single Cylinder, 2-stroke, Air-cooled Displacement: 52cc Mixed Fuel: Gasoline:Two-stroke Oil (25:1) Ignition System: C.D.I. Power: About 1.7kw Horsepower: 2.3hp Fuel Tank Capacity: 1.2L/0.3gal Speed: 6500-8500r/min No-load Speed: 2800-3200r/min Fuel Consumption: 610g/kw·h Drill Diameter: 10cm/3.9inch, 15cm/5.9inch, 20cm/7.9inch Drill Length: 75cm/30inch Shaft Size: 2*5cm/0.8*2inch Engine Size: 22.5*22*15cm/8.9*8.7*6inch Digger Whole Size: 50*23cm/20*9inch Extension Bar Length: 30cm/11.8inch Digger Package Size: 35*28.5*29cm/13.8*11.2*11.4inch Drill Package Size: 80.5*22*33cm/31.7*8.7*13inch Digger Gross Weight: 9kg/20lbs Digger Net Weight: 8.1kg/18lbs Drill Gross Weight: 9.5kg/21 lbs Drill Net Weight: 7.35kg/16.2lbs Notes The tank should be filled with a mixture of oil (gasoline: two-stroke oil = 25: 1). It should be used with two-stroke oil rather than four-stroke oil, otherwise accidents will occur. All oils are excluded. Please start the machine by pulling the starter quickly without stopping in the middle. Press the oil bubble a few more times before starting. If there is oil coming in and out of the fuel line, which means oil has been supplied. Do not use on steep slopes exceeding 15°. Please do not drill ice, frozen soil, sandy clay, and sand and gravel mixed soil, or the drill bit will bend easily. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Sturdy and Durable: Steel handles and carbon steel drills have high strength and hardness, and are not easy to rust and corrosion. The aluminum gearbox has high-temperature resistance and good sealing. The high-quality PP engine housing is drop and impact-resistant and protects the internal parts. Great Power: With its two-stroke fuel engine, this digger has a powerful horsepower (about 1.7kw/2.3hp), which makes it easier and more efficient to dig holes to save more valuable time and make digging an enjoyable experience. Ergonomic Design: The ergonomic double handles are wrapped in rubberized covers for a stable and comfortable grip and are also suitable for two-person control that is less effort intensive than single control. Good Heat Dissipation: The heat dissipation holes on the engine can effectively dissipate heat to ensure stable operation, reduce noise, and prolong the service life of the machine.