Used Dell Precision T3610 AutoCAD Workstation E5-1620 V2 4 Cores 8 Threads 3.7Ghz 64GB 2TB SSD Quadro K600 Win 10 Pro

3.7Ghz Quad Core E5-1620v2 CPU, 8 Virtual Cores in Hyper-Threading Mode!64GB of DDR3-1866 RAM2TB 6Gb/s SATA Solid State DriveNvidia Quadro K600 1GB DDR3 Graphic CardWindows 10 Professional 64-Bit Pre-Installed

AutoCAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed – Faster the better. Recommend 3Ghz or higher. Processor Cores – Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) – 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage – Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) - Dedicated video cards supporting DirectX 11 or later are strongly recommended. Nvidia Quadro are supported and certified by AutoDesk. This workstation is certified to work with AutoCAD Processor: Single Intel Xeon E5-1620 V2 Quad Core 3.7Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available) Memory: 64GB DDR3-1866 Memory. Supports up to 128GB of total memory, 8 DIMM slots Quad channel; Up to 128GB 1866MHz ECC or 1600MHz non-ECC DDR3 memory (actual memory speed dependent on processor capability) Storage: New 2TB 6Gb/s SATA Solid State Drive Drive Bays: Up to three 3.5" or four 2.5" internal SATA, SAS or SSD drives. Additional add-in controller required for SAS hard drives. One external 5.25'' bays. One external slimline optical bay. Raid Controller: Integrated: Intel AHCI 6Gb/s SATA controller with six ports (two 6Gb/s, two 3Gb/s, two reserved for optical drives) supports software RAID 0, 1, 5, 10 Graphics: Nvidia Quadro K600 1GB DDR3 Graphic Card, DirectX 11 - 1 DVI, 1 DisplayPort - Support up to 2 active monitors (Certified Hardware for AutoCAD 2019) Operating System: Windows 10 Professional Software: AutoCAD Software is not included Power Supply: 425W Power Supply Optical: DVDRW Drive Networking: Slots: Five full length, one half length: Two PCIe x16 Gen 3;one PCIe x16 Gen 3 wired x8 (half length); one PCIe x4 Gen2; one PCIe x1 Gen 2; One PCI 32bit/33MHz. Front Ports: 1 USB 3.0, 3 USB 2.0, 1 Headphone,1 Microphone. Rear Ports: 3 USB 3.0, 3 USB 2.0, 2 PS2, RJ-45 (NIC) Internal Ports: 3 USB 2.0, 2 SATA 6.0GB/s, 2 SATA 3.0GB/s, and 2 SATA 3.0GB/s for Optical. Peripherals: Power Cable Included. Mouse, Keyboard, and Video Cable Not Included. Condition: Seller Used unit may have minor scratches and scuffs *Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.