DAE PD-200 2" Lead Free NSF61, IP68 Positive Displacement Water Meter, Pulse Output, Gallon

2" NSF61 Certified, Lead-Free NSF61, IP68 Positive Displacement Water Meter with Pulse Output (Reed Switch, dry contact, no voltage).Model: DAE PD-200 Certified by independent test lab to exceed AWWA national accuracy standards +/-1.5% within normal flow rate range. Can detect very small flow. Conforms to both AWWA C700 and ISO 4064 Class C. Unit: US Gallon, for clean water only Pulse Output: 1 gallon/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible for the result if connecting to third party device which is not certified by DAE.Meter body: Lead-Free Brass. Dimension: 17" length, 6" wide, 6.75" height. Weight: 41 lbs. Connection: 2" AWWA two-bolt elliptical flange, drilled Max. Reading: 9,999,999.99 Gallons, Min. Reading: 0.01 Gallons. The 1st digit (fixed) from the right is in gallons. For example, if you see 0001230 on the register, it is 1230 gallons. The 1st dial under the digits is in gallons. The 2nd dial is in one tenth gallons (*0.1 gallons). Reading on 4th picture of the listing is 0.17 Gallons.Max temperature: 122˚F (50˚C)Pressure drop: 0.1 psi @ 20 GPM, 0.8 psi @ 40 GPM , 1.8 psi @ 60 GPM, 3.1 psi @ 80 GPM Safe Maximum Flow Rate: 160 GPM, Recommended Maximum Continuous Flow Rate: 80 GPM, Minimum Test Flow Rate: 2 GPM, Normal Test Flow Limits: 8-160 GPM The max. working pressure is 232 psi, exceeding the requirement from AWWA standard 150 psi.Bore diameter: 2.01 inch (51mm).For the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.

Can be installed in any position, vertically or horizontally, dial facing upwards or downwards or side-way, water flowing downwards or upwards. Good for outdoor use, pit application. Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130 (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go. Ready for use with DAE CO-10 (Electronic Pulse Counter) or DAE CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and DAE AMR (for 16 water meters) for remote reading (5th picture). CO-10 or AMR130 will be purchased separately. Conforms to both AWWA C700 and ISO 4064 Class C. for City water only. Wireless remote reading available (3rd picture) with DAE WSC500 RF converters. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.