Soundcraft Notepad 124 / MSR400 Mains & Monitors Package

Includes the Soundcraft Notepad 124; 2 Yamaha 12" MSR400 powered PA speakers; 2 Kustom KPC10P powered monitors; 2 Audio-Technica M4000S hand-held dynamic mics; 2 TRS-TRS cables; 2 XLR cables; and a pair of standard speaker stands. Soundcraft Notepad 124 : The Soundcraft Notepad 124 mixer boasts Soundcraft audio performance with the acclaimed GB30 mic preamp and EQ technology in a highly compact, solid chassis. The 124 has 4 mono mic/line inputs. It also boasts 4 stereo line inputs, and suits a very wide range of applications where simple yet high-quality mixing is required, such as in home recording, small band/cabaret PA systems, AV presentation systems, small broadcast edit suites, educational environments and general contracting. The FX send is replaced by a standard Aux send with a dedicated output. It also provides a recording output of the mix on RCA/Phono connectors as well as a stereo input for CD playback etc. Other highly desirable functions include a high-pass filter on the mono inputs, a 60mm fader for the mix output selectable sensitivity of +4dBu or -10dBV on each stereo input (Notepad 124 models only) and multisegment led metering on the mix output along with a headphone monitoring output. Yamaha MSR400 Powered PA Speaker: The Yamaha MSR400 Powered Speaker is a biamplified, 2-way system featuring 400W maximum burst power driving a 12" cone woofer and 1-3/4" voice coil compression driver. Frequency division is accomplished prior to the amplifiers via a line-level electronic crossover, eliminating problems with loss, distortion, and phase. Power is optimally assigned to the low- and high-frequency units for smooth, natural balance across the spectrum. The Yamaha speaker accepts nominal input levels from -36dB to +4dB, meaning you can connect any source from microphones to pro line-level gear directly. 3 parallel connections are provided--2 XLR-type connectors and one balanced phone jack--which can be used either as inputs or parallel outputs. The Yamaha MSR400 speaker cab has input level control for matching with the source signal, low and high EQ controls, and a sleek appearance round out the great features of this speaker cab. Stackable, flyable, and polemountable. Kustom KPC10MP Powered Monitor (Floor/Main): The Kustom KPC10MP is a 50-watt powered monitor speaker with an angled wedge design, a 10' Kustom-built loudspeaker and a piezo HF driver. It is tuned to deliver rich, balanced tonality while accurately reproducing a wide variety of audio content. The Kustom KPC10MP powered monitor speaker provides balanced XLR and TRS 1/4" (balanced/unbalanced) input jacks. These may be used to connect a wide variety of line level devices such as non-powered mixers, preamps, keyboards, drum machines, and other audio devices including music players such as iPods and CD players. A volume control adjusts the overall level of the Kustom powered speaker. A TRS 1/4" line out jack may be used to daisy chain 2 or more KPC speakers for a wider dispersion of sound. For example, if a non-powered audio mixer has been connected to the Kustom KPC speaker's input, the line out of this first speaker may be connected to a second speaker's input. This is a daisy chain and it often requires shorter cable hookup lengths versus connecting the second speaker directly to the audio mixer. In addition to being used as a powered floor monitor, a built-in polemount socket enables you to elevate the Kustom KPC10MP monitor for use as a powered PA speaker. Audio-Technica M4000S: The handheld Audio-Technica M4000S dynamic microphone combines professional features with a ridiculously affordable price tag. Audio-Technica tailors the M4000S mic's frequency response for crystal-clear vocal reproduction. Great feedback rejection and focused

Includes the Soundcraft Notepad 124; 2 Yamaha 12" MSR400 powered PA speakers; 2 Kustom KPC10P powered monitors; 2 Audio-Technica M4000S hand-held dynamic mics; 2 TRS-TRS cables; 2 XLR cables; and a pair of standard speaker stands