3M 06396 Automotive Adhesion Promoter / Sponge Applicator Packet

Formulated specifically for use with 3M Acrylic Foam Tapes, our 3M Adhesion Promoter 06396 promotes a permanent bond with most low surface energy plastic materials commonly used in automotive instrument panel, interior trim and exterior trim parts. It works well with LSE plastics, as well as TPO, PPO, PP, PC, PC and ABS. The liquid primer dries in 30 to 90 seconds for fast and efficient application once dry, it is ready to accept the attachment tape. The adhesion promoter is incorporated into an easy-to-use sponge inside a notched packet. Technicians simply tear open the top of the packet at the notches to expose the sponge and, using the bottom of the packet as an applicator, apply the fluid to the auto trim or part. Each sponge applicator packet contains .85 oz. (2.5 cc) of adhesion promoter, enough to cover up to 150 square inches. The adhesion promoter can also be cleaned from most surfaces using MEK or acetone solvents.

Helps ensure robust attachment of trim and injection-molded body side moldings Notched packets open quickly and evenly for efficient use Dries in as little as 30 seconds One packet covers up to 150 sq. in. For use on LSE plastics with 3M Acrylic Foam Tapes