52CC 2HP Gas Powered Earth Auger 2-Stroke Post Hole Digger Auger, NO Drill Bits

How to Mix Oil 1. In the ratio of 25 (gasoline):1 (motor oil)-50 (gasoline):1 (motor oil), add gasoline and motor oil separately and cover with a lid. 2. Just shake them well. How to Install 1. Lift the motor. 2. Connect the drive shaft. 3. Insert the bolt. 4. Put the set pin to lock it on. Specification Model: 44F-A Stroke: 2 Displacement: 52cc Power: 1.8kw(2HP) Rotational Speed: 6500rpm Turbine Reduction Ratio: 39:1 2-cycle Oil/Gasoline Mixing Ratio : 1:25-1:50 Gasoline Type: Above #90 Available Drill Diameter: Within 20cm/7.87inch Color: Black, Red Material: Metal, Plastic, Iron, Manganese Steel, and Aluminum Engine: Single Cylinder, 2-stroke Fuel Tank Capacity: 1.2L/50.72oz Volume: 110dB Cooling System: Air-cooling Ignition: CDI Carburetter: Diaphragm Type Gross Weight: 10kg/22.05lbs Net Weight: 8.5kg/18.74lbs Product Length: 43cm/16.92inch Product Height: 37cm/14.56inch Length of Handle: 30cm/11.81inch Package Size: 46.5*36*31cm/18.31*14.71*12.2inch Package Included 1 x Post Hole Digger 1 x Fuel Mixing Bottle 1 x English Manual All Accessories for Assembly Notes 1. Please note that this product only includes a post-hole digger, it does not include a drill, so you need to purchase it yourself. 2. Please remember to close the air door and then pull the starter (don’t forget this step, otherwise you will not be able to ignite when you deadlift). 3. After the start is successful, remember to open the damper (not to pull the starter when opening the damper. When the damper is opened, too much air enters and there is too little oxygen, it is difficult to start, so pull the starter when the damper is closed). 4. Please do not use pure gasoline directly. The mixed engine oil must be two-stroke, and waste engine oil or other oils cannot be used. 5. Please do not use this product on rainy days, in bad weather, in poor vision, and in high temperatures. The engine will get water, and the ground is wet and slippery, so the work is prone to danger. At the same time, please do not work after drinking or taking drugs.

High Working Efficiency: The digger is equipped with a 52cc gasoline engine, with a power of 1.8kw and a rotating speed of 6500rpm, which can provide strong power and make your work easier and faster. One or two people can easily handle various tasks. Good Heat Dissipation Performance: The digger adopts a hollow design, which provides a good heat dissipation effect. It can timely reduce the temperature of the motor, extend its service life, and reduce potential safety hazards. Simple Operation: The product is equipped with a manual starter, you can easily start the machine by pulling it backward. The easy-to-grip finger throttle and switch control on handlebar for enhanced user power and speed control at your fingertips. At the same time, the digger is also equipped with marked words, which is more convenient for you to operate and save time.