BOSS Audio Systems BX35 Car Electronic Crossover - 3 Way, Pre-Amp, Fine Tune Your High-Mid-Low Range Speaker Frequencies, Equalizer, DPS Audio Processor

BOSS Audio Systems BX35 Car Electronic Crossover - 3 Way, Pre-Amp, Fine Tune Your High-Mid-Low Range Speaker Frequencies, Equalizer, DPS Audio Processor Get even better sound using this 3-way Preamp Crossover from Boss Audio. Inputs are at the rear of the unit, while outputs are front, rear and sub. Frequency response is 10 Hz to 20 kHz. The low-pass filter is 40 Hz to 250 Hz, while the variable high-pass filter ranges from 45 Hz to 5 kHz. This unit includes a remote subwoofer control. Why Do I Need A Crossover? Speakers reproduce sound based on high, low, or mid-range frequencies. This process is called the crossover effect and occurs because the vast majority of audio systems cannot cover the entire spectrum sufficiently to minimize sound distortion and maintain an appropriate frequency ratio. A lot of amplifiers have either a built-in 'variable' crossover so that you can set the frequency at exact sound specifications or a 'fixed' crossover. By connecting the BX35 to your amplifier, you will have total control you exactly how you want your bass to sound as well as your mid level and high level frequencies, giving you a pristine listening experience. Input impedance: Front and rear: 39k-Ohm – Low pass: 10k-Ohm Maximum input level: 4.5V RMS Maximum output level: 9V RMS High pass crossover, 12 dB/Octave: Front 50Hz-5kHz – Rear 45Hz-1.6kHz Low pass crossover, 12 dB/Octave: 40Hz-500Hz Low boost: 0 to +18 dB Gain structure: Variable 0 to +6 dB Frequency response, low pass: 5Hz-500Hz, -3 dB Frequency response, low pass: Front 50Hz-50kHz, -3 dB – Rear 45Hz-50kHz, -3 dB Signal to noise ratio: > 95 dB THD: < 0.01% Dimensions: 8-1/4” W x 6-1/2” L x 1-1/2” H (222mm x 156mm x 38mm)

•3 Way Crossover •Variable Low Pass Filter and Variable High pass Filter •Subwoofer Phase and Base Boost Control •Rear Input •Front, Rear & Sub Outputs