Reaper Miniatures Advanced Level Sculpting Armatures 75002 Sculpting Accessories

Advanced Level Sculpting Armatures - Advanced Dollies Each set contains 4 unpainted metal dollies (~38mm tall from top to bottom) and 4 metal bases (~21mm long). Figures are posable to a certain extent but metal can break if bent too much. Directions provided on back of package: An approximate 1:1 ratio of epoxy and hardener yields best results. Mix two parts together until a uniform color is achieved. In order to achieve optimal adhesion, surfaces should be free of grease or dirt. Epoxy has a working time of 1.5 to 2.5 hours. Place mixed epoxy in the freezer to stop hardening. Place mixed epoxy under a warm lamp (95F/35C max) to speed hardening. Final harness is reached in about 24 hours. WARNING: May cause irritation to sensitive skin. Wash hands with soap and water immediately after use. Eye irritant. In case of eye contact, flush with water. Contact physician. CAUTION: This product may be harmful if ingested. When sanding cured epoxy, putty, or substrate, use protective eyewear and dust mask. Please note: dollies may look slightly different than stock image.

Reaper Miniatures: Accessories: Advanced Level Sculpting Armatures