(2) JBL Pro JRX212 12" 2000w 8 Ohm PA/DJ Speakers+Crown Amplifier+Stands+Cables

Package: (2) JBL JRX212 2,000 Watt 12" Passive 2-Way DJ P/A Speakers With a 12" LF Driver and 1" HF Compression Driver + Pair of Rockville RVSS2-TSNL4 Heavy Duty Adjustable Pro PA Speaker Stands + (2)1/4" to SpeakOn NL-4 Cables + Carrying Case + Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier

Package Includes: (2) JBL Pro JRX212 12" 2000 Watt Professional Passive PA/DJ Speakers 8 Ohm JRX212 (1) Pair of Rockville Tripod Speaker/Lighting Stands+(2) 20 Foot 1/4"-SpeakOnCables (1) Crown Pro XLi1500 900w 2 Channel DJ/PA Power Amplifier Professional Amp XLI1500 Features of JRX212: JBL Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbonvoice coil JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver Advanced network topology crossover design High-voltage capacitors and inductors with massive cores and heavy gauge wire Progressive Transition™ high frequency waveguide 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure SonicGuard™ protects the high frequency driver from excess power withoutinterrupting the performance. Non-resonant, all-steel handles 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allowsthe speaker to tilt 10° Specifications: Power Rating : 250 W / 1000 W Frequency Range (-10 dB) : 60 Hz - 20 kHz Frequency Response (±3 dB) : 80 Hz - 18 kHz Sensitivity (@1m) : 98 dB SPL (1w/1m) Nominal Impedance : 8 ohms Recommended Amplifier Power : 250 W to 500 W into 8 ohms Maximum SPL : 128 dB Nominal Dispersion : 90º x 50º Crossover Frequency : 2.1 kHz Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in) Weight : 19.5 kg (43 lb) High Frequency Driver : JBL 2414H-C 1" exit compression driver mounted onProgressive Transition™ Waveguide Low Frequency Driver : JBL M112-8 Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in TS phone jack (x1); parallel Grille : 18-gauge, powder-coated steel Mounting & Suspension : 36 mm, dual-angle pole-mount socket Video of RVSS2-TSNL4: Features: Adjustable Height Steel Construction Black Color Weight capacity: 100 LBS Adjustable Height Range: 47.25-78.75 inches Base spread: 15-40 inches Tube Diameter: 1.5 - 1.37 inch Leg Diameter: 1.37 inche Includes (2) 20 foot 1/4" to Speakon NL-4 speaker cables Includes (1) Carry Bag Features of XLI1500: Crown Pro XLi1500 900 Watt 2-Channel DJ/PA Power Amplifier RMS Power @ 4 Ohms: 450 Watts x 2 Channels RMS Power @ 8 Ohms: 330 Watts x 2 Channels RMS Power @ 8 Ohms Bridged: 900 Watts x 1 Frequency Response: 20 Hz - 20 kHz THD: <0.5% Distortion: <0.35% Slew Rate: >10V/us Voltage Gain: 31 dB Damping Factor: 8 Ohms, 10 Hz to 400 Hz Signal to Noise Ratio (A-Weighted): >100 dB Crosstalk: -75 dB, -59 dB Input Sensitivity: 0.775V or 1.4V Input Impedance: 20k Ohms, 10k Ohms AC Line Voltage and Frequency Configurations: (+10%) 120V~60 Hz; 220V~50/60 Hz;230-240V~50/60 Hz IEC Power Connector: 15A Stereo/parallel/bridge-mono mode User selectable input sensitivity - 0.775V and 1.4V Efficient forced-air cooling prevents excessive thermal buildup Electronically balanced RCA & XLR inputs; binding post and Speakon outputs Two level controls, power switch, power LED, and six LEDs which indicate signalpresence, clip and fault for each channel Protection against shorts, no-load, on/off thumps and radio-frequencyinterference Product Dimensions: 19" x 3.5" 12.4" inches Product Weight: 28 Lbs.