Acoustic Audio 7.1 Speaker System Flush Mount 7 Speaker Set and 6" Powered Sub

Acoustic Audio by Goldwood HT-87 Flush Mount 7 Speaker Set and Powered Subwoofer Center Channel with Front, Middle and Rear, Right and Left home theater configuration Traditional Passive speaker design, drive power from your home audio receiver 5 Pcs of MT8 In Wall Wired Speakers 8" High Rigidity Polypropylene cone woofers and 12mm soft dome tweeters Frequency response is 30Hz-22 kHz with 98dB at 8ohm Fits hole size of 8.75" x 12.66" with 4" depth and Spring Loaded raw wire connections 2 Pcs of SP8c In Ceiling Wired Speakers 8" High Rigidity Polypropylene cone woofers and 12mm soft dome tweeters Frequency response is 30Hz-22 kHz with 98dB at 8ohm Fits hole size of 9.5" with 4" depth and raw wire clamp or solder connections Pressure Lock Mounting System clamps tight to drywall with No Hardware Needed Durable ABS Housings and Removeable Grills are paintable Acoustic Audio PSW-6 Home Theater Powered Subwoofer RCA inputs easily connect to your home theater receivers dedicated Sub Out Integrated High Efficiency Power Amplifier with 250 watts peak power Frequency response of 30 - 250 Hz with 96dB at 8ohm 6.5" Down Firing long throw woofer with high rigidity PVA Treated cone Standing sub with feet size is (H x W x D) 11.1" × 9.25" × 10.04" This Powered Subwoofer is NOT LFE Compatible System Requirements Any home audio receiver or amplifier with raw speaker wire outputs and Sub Out Your receiver power should be no less than 10 and no more than 300 watts per channel CL3 Rated in wall certified raw speaker wire to connect your receiver to the speakers Applications Home Theater Surround Sound Systems Whole House Audio Systems What's in the boxes 7 Flush Mount Passive Speakers with Removeable Grills and Cut-Out Templates 1 Powered Subwoofer with RCA Cable Instruction Manuals

Specifications HT-87 2100 Watt 8" In-Wall/Ceiling 7-Piece Multi-Speaker System Contents: (5) 8" Rectangular In-Wall/Ceiling Speakers (2) 8" Round In-Wall/Ceiling Speakers 2100 Watts Peak Power Handling (Total) / 300 Watts Peak Power Handling (Each) 1050 Watts RMS Power Handling (Total) / 150 Watts RMS Power Handling (Each) 2-Way Design and Functionality Butyl Rubber Surround 8" Woofers High Rigidity Polypropylene Cone with Extended Throw Drive Assembly 12mm Soft Dome Tweeters Pivoting Tweeters on Rectangular Speakers Paintable, White Grills Frequency Response: 30Hz - 22kHz (+/-3dB) Efficiency / Sensitivity: 98dB at 1 watt 1 meter Crossover Frequency: 2200Hz Impedance: 8 Ohm Rectangular Speakers: Cut Out Size is 8.75" x 12.66" per speaker, Overall Size is 10.125" x 14.25" per speaker and Mounting Depth is 3.875" Round Speakers: Cut Out Size is 9.5" per speaker, Overall Size is 11" per speaker and Mounting Depth is 4" New PSW-6 Powered 6.5" Subwoofer Woofer: 6.5 Inch Down-Firing Long Throw Subwoofer High Rigidity PVA Treated Cone Linear Slot Port Signal Sensing ON/OFF Bass Level / Gain Control Line-Level and Speaker-Level Inputs Built-in Digital Drive High Efficiency Amplifier Cabinet Design: Advanced RFL Bass Reflex Cabinet Material: High-Density MDF 125 Watts RMS to 250 Watts Dynamic Power Frequency Response: 30Hz - 250Hz Variable Low Pass Frequency Crossover: 40 - 140 Hz Efficiency / Sensitivity: 96dB at 1 watt 1 meter Dimensions (H x W x D): 11.1 × 9.25 × 10.04 Inches This Listing and Price is for 1 HT-87 Complete 7 Piece Speaker System and 1 PSW-6 Powered Sub