American DJ DMX Lighting Operator Controller Board and Chauvet 25 Foot DMX Cable

Really wow the room with an intricate light display using the American DJ DMX Operator and the included Chauvet 25-Foot DMX Cable. The light controller can be used to control up to 192 DMX channels with 12 individual fixture channels and comes with a built-in microphone. The DMX Operator is made to easily program lights for your events and parties. You can record up to 6 programmable chases with fade times at different speeds. The 8 individual faders make it easy to control any DMX-512 moving light. Switch to blackout mode using the MIDI input signal. The DMX cable is made specifically for lighting and it is 25 feet long, has an impedance of 117 Ohms, displays a male to female connector with 3 pins, and meets all standards of suitability and quality to provide safety, shielding, and to prevent transmission interferences. This cable helps you ramp up your parties, weddings, and festive occasions.

American DJ DMX Operator Controller DMX operator light controller An affordable solution for controlling DMX products Control up to 192 DMX channels 12 individual fixture channels Control up to 12 separate intelligent lights with up to 16 DMX channels per fixture Fixtures with less than 16 DMX channels may be combined on 1-channel fader Record up to 6 programmable chases with fade times and different speeds 8 individual faders provide easy programmability for intelligent lighting or dimmer packs MIDI controllable DMX-512 3-pin XLR signal Built-in microphone Remote control: Blackout controlled by MIDI input signal Power input: DC 9V-12V, 220 mA min. power supply included, 120V or 220V operation Dimensions: 5.25 x 19 x 2.5 inches 19-inch/ 3 r.m. spaces Weight: 5 pounds Part Number: DMX-OPERATOR Chauvet DJ 25 Foot 3 Pin DMX Cable Designed specifically for DJ lighting Connector: Male to female DMX Length: 25 feet Pins: 3 AWG: 24 Impedance: 117 Ohm Part Number: DMX3P25FT