BaByliss PRO FX604R Replacement Blade: Size #1, 3mm

BaByliss PRO FX604R Replacement Blade: Size #1, 3mm

The BaByliss PRO FX604R is a high carbon steel replacement blade for the BaByliss PRO FX650.To remove the existing blade, first unplug the unit. Push the adjustable taper lever all the way up. Loosen and remove the fastening screws from the large blade (cutting comb). Save the screws. Remove the large blade and lift the small blade (cutter) from the black plastic oscillating head.To replace the existing blade, slide the cutter back onto the black plastic oscillating head. Line up the cutting comb with the two screw holes. Replace the original screws and lightly tighten. To make sure that the small blade and the large blade are properly aligned, match up the two blades point to point. The top of the large blade teeth should be 1/32" to 1/16" above and parallel to the bottom blade. The extreme left-hand tooth of the top blade must cover or be to the left of the first small tooth on the bottom blade. Be sure to tighten the screws after the blades have been aligned.