Cimiva FPV Racing Drone Happymodel Mobula6 1S 65mm Brushless With 4in1 Crazybee F4 red and black Type 2 Flysky SPI Receiver

Cimiva FPV Racing Drone Happymodel Mobula6 1S 65mm Brushless With 4in1 Crazybee F4 red and black Type 2 Flysky SPI Receiver
Angle View: Cimiva FPV Racing Drone Happymodel Mobula6 1S 65mm Brushless With 4in1 Crazybee F4 red and black Type 2 Flysky SPI Receiver
Cimiva FPV Racing Drone Happymodel Mobula6 1S 65mm Brushless With 4in1 Crazybee F4 red and black Type 2 Flysky SPI Receiver
(1) 1 shops 0 products

Detailed product description

Features: 1. Support Betaflight tuning, multiple flight modes. 2. Integrated injection molding Tiny Whoop structure. 3. The highly integrated motherboard integrates OSD, Dshot ESC, 2.4G SPI receiver, 5.8g 25mw 40CH VTX. 4. Integrate Betaflight OSD function, keep abreast of the flight voltage and receiver signal, and fly more calmly. 5. VTX comes with Smartaudio function, you can adjust the flight control parameters through the OSD, adjust the flight control PID, and adjust the VTX frequency point parameters. Description: Completely assembled and debugged, you can fly with the remote control when you get it, and the camera's pitch angle is adjustable. Specifications: Brand: Happymodel Model: Mobula6 Crazybee F4 LiteFlight Controller: (Type 1 SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Type 2 SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky/Flysky receiver Built-in 5V 1A BEC Built-in voltage detection Onboard Type 1 Receiver Version: SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model- Support EU LBT Radio Transmitter Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Onboard Type 2 Receiver Version SPI BUS receiver Frsky D8 compatible Compatible Non EU transmitter D8 model- Support EU LBT Radio Transmitter Channels: 8ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Onboard 5A BLheli_S 4 in1 ESC: Model: SE0802 KV: 19000KV / 25000KV Motor Configu-ration:9N12P Stator Diamter:8mm Stator Length:2mm Shaft Diameter:Φ1mm Motor Dimension(Dia.*Len):Φ10.5mm*14.9mm Weight(g):1.9g No.of Cells(Lipo):1S only Gemfan 1219 3-Blade Propeller: Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Quantity: 4 CW & 4 CCW Weight:0.28g Onboard 5.8G 40CH 25mW VTX: Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready Runcam Nano 3 FPV Camera: Brand Name: Runcam Model: Nano 3 Item Name: 1/3 CMOS 800TVL Camera Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: 0.01Lux@1.2F D-WDR: Auto Day/Night: Color Power:DC 3-5.5V Current: 110mA@5V120mA@3.3V Housing Material: ABS FOV: 120 degree Dimensions: 14*14*9mm (L*W*H) Lipo Battery (Included): Continuous Discharge Rate: 30C Size: 57*12*7mm Weight: 8g Connector: PH2.0 Quantity: 4 PCS Package Included: 1 * Mobula6 1S 65mm racing drone (built in battery) 1 * Crazybee F4 Lite flight control 4 * SE0802 KV19000 8 * Gemfan 1219 three-blade propeller (4cw + 4ccw) 1 * Runcam Nano3 1/3 CMOS 800TVL 1 * 5.8G 25mw 40ch vtx 4 * 1S 300mah 30C LiHV battery 1 * 1S Lipo / LIHV USB charger 1 * Propeller remover Notes: 1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item colo

Description:Completely assembled and debugged, you can fly with the remote control when you get it, and the camera's pitch angle is adjustable. Specifications:Brand: HappymodelModel: Mobula6Crazybee F4 LiteFlight Controller:(Type 1 SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR(Type 2 SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Board size: 28.5 * 28.5MMPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in SPI Frsky/Flysky receiverBuilt-in 5V 1A BECBuilt-in voltage detectionOnboard Type 1 Receiver Version:SPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 model- Support EU LBT Radio Transmitter Channels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 100m~200mOnboard Type 2 Receiver VersionSPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 model- Support EU LBT Radio TransmitterChannels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m p>Onboard 5A BLheli_S 4 in1 ESC:Model: SE0802KV: 19000KV / 25000KV MotorConfigu-ration:9N12PStator Diamter:8mmStator Length:2mmShaft Diameter:Φ1mmMotor Dimension(Dia.*Len):Φ10.5mm*14.9mmWeight(g):1.9gNo.of Cells(Lipo):1S onlyGemfan 1219 3-Blade Propeller:Center Thickness:5mmProp Disk Diameter:31mmCenter Hole Inner


Compare buying offers


Search
Amazon Amazon

Currently Unavailable - Out of Stock

We don't know when or if this item will be back in stock. Please check back later for updates.

Product specifications

Technical details

Manufacturer -
Brand Cimiva
Item model number -
Color Black
Weight -
Height -
Depth -

Additional product information

Product Id 715263
User Reviews and Ratings 3 (1 ratings) 3 out of 5 stars
UPC 226153202065

Compare buying offers


# Title Reviews User Ratings Price
1
Search on Amazon
Price:
Search on Amazon
Search on Amazon

Similar Products View All


arrow_upward