cricut New Transfer Tape

Prep the vinyl cuts by removing the negative pieces from each of the images using the weeding tool found in the Cricut?��� Tool Kit. This process is also known as weeding.,Remove the liner from the transfer tape. Take the transfer tape in each hand with the adhesive side facing down.,Gently place the transfer tape over the images. Start in the center and move out toward the edges. A craft stick or the scraper found in the Cricut?��� Tool Kit can be used to burnish* the tape onto the vinyl.,Peel the vinyl away from the liner at a 45-degree angle. If the vinyl sticks to the liner, simply burnish the transfer tape onto the vinyl again. Peel the vinyl away from the liner.,Carefully place the transfer tape with vinyl images on a clean and dry surface, making sure the images are straight.,Press the vinyl onto the surface, starting in the center and moving out toward the ends. A craft stick can be used to burnish the vinyl onto the surface.,Peel the transfer tape away from the vinyl at a 45-degree angle. If the vinyl sticks to the transfer tape, simply burnish the vinyl onto the surface again. Peel the transfer tape away from the vinyl.,Transfer Tape,Cut a piece of transfer tape the same size as your cut image.,Apply pressure over image using a scraper or credit card. If the image isn't coming up with the transfer tape, re-lay it down, apply more pressure, and try again.,Press vinyl image onto a clean surface, working from center outward, smoothing out and applying pressure as you go.

cricut New Transfer Tape cricut New Transfer Tape 12" x 48" Clear Vinyl