EMAX Tinyhawk II 75mm 1-2S Whoop FPV Racing Drone RTF FrSky D8 Runcam Nano2 Cam 25/100/200mw VTX 5A Blheli_S

Description: In our endless search for perfected flight performance, our engineers at EMAX have revisited the Tinyhawk platform in order to optimize the user experience in the Tinyhawk II. With improvements made in every area, pilots will be able to navigate their aircraft in a variety of situations. The first of these improvements stems from the redesigned FPV transmission system. By partnering with the experts over at Runcam, the Tinyhawk II features the Nano 2 FPV Camera, known for its crisp colors, wide dynamic range, and sharp optics. Tinyhawk II to have cleaner video than ever on 25mw, the indoor standard, as well as 100mw and 200mw options for increased range and object penetration while experiencing crystal clear video. Featuring motors which have a 7% increase in power, faster propeller speeds are achievable allowing an increase in speed, giving pilots an edge against the competition. In order to compensate for the higher achievable speeds when utilizing higher voltage batteries, the Tinyhawk II features an adjustable camera mount, allowing pilots the ability to customize their preferred angle of flight. With the higher speed capabilities, the Tinyhawk II frame had to be redesigned from the ground up in order to increase the durability. The result is a refreshing take on the unique aerodynamic properties of the original Tinyhawk. Built into the frame is a throttle response LED system which increases in brightness depending on the throttle input of each motor. Specifications: Wheelbase: 75mm Frame Material: Polypropylene Motors: Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller: Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 Camera and VTX: VTX Power: 25/100/200mw Switchable EMAX E6 Transmitter Specifications: Maximum appearance size 181×213×80(mm) Number of channels 6 Channels Transmission frequency 2.4GHz ISM Band(2400MHz~2483.5MHz) Output Power 22dbm Modulation GFSK Battery 1 cell 18650 battery EMAX Transporter Goggles Specifications: Maximum appearance size 140×153×90(mm) Resolution 480×272 Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Note: - There might be little error of size for manual measurement. - The colors deviation might differ due to different monitor settings, please kindly understand.

In our endless search for perfected flight performance, our engineers at EMAX have revisited the Tinyhawk platform in order to optimize the user experience in the Tinyhawk II. With improvements made in every area, pilots will be able to navigate their aircraft in a variety of situations. The first of these improvements stems from the redesigned FPV transmission system. By partnering with the experts over at Runcam, the Tinyhawk II features the Nano 2 FPV Camera, known for its crisp colors, wide dynamic range, and sharp optics. Tinyhawk II to have cleaner video than ever on 25mw, the indoor standard, as well as 100mw and 200mw options for increased range and object penetration while experiencing crystal clear video. Featuring motors which have a 7% increase in power, faster propeller speeds are achievable allowing an increase in speed, giving pilots an edge against the competition. In order to compensate for the higher achievable speeds when utilizing higher voltage batteries, the Tinyhawk II features an adjustable camera mount, allowing pilots the ability to customize their preferred angle of flight. With the higher speed capabilities, the Tinyhawk II frame had to be redesigned from the ground up in order to increase the durability. The result is a refreshing take on the unique aerodynamic properties of the original Tinyhawk. Built into the frame is a throttle response LED system which increases in brightness depending on the throttle input of each motor.