Enduro 6806 LLU MAX Radial Suspension Bearing - ABEC-3, MAX-Design, 30mm x 42mm x 7mm

Enduro, Max, Cartridge bearing, 6806 2RS, 30X42X7mm For BB30 - Suitable for Tacx trainers with rear-wheel drive only - 01: T1706 E-Thru trainer axle M10x1, with metric fine thread. For hubs with axle skewer attachment 135×10mm: various Swiss and Shimano. Length: 162.5mm - 02: T1707 E-Thru trainer axle M12x1, with metric fine thread. For hubs with axle skewer attachment 142×12mm: various DT Swiss and Shimano. Length: 162.5mm - 03: T1709 E-Thru adapter X-12 (>142 mm) - 04: T1711 E-Thru trainer axle M12x1, with metric fine thread. For hubs with axle skewer attachment 142×12mm: DT Swiss RWS axle skewer (conical and flat), Syntace X-12 system (Specialized) and various Shimano. Length: 175mm - 05: T1710 E-Thru trainer axle M12x1.5, with medium thread. For hubs with axle skewer attachment 142×12 including Shimano SM-AX65, SM-AX75, SM-AX76 and SM-AX78. Length: 162.5mm - 06: T1708 E-Thru trainer axle M12x1.75, with standard threaded cartridge. For hubs with a Maxle axle skewer attachment 135×12, 142×12, 150×12 mm and Trek ABP 142×1. Length: 179.5mm

90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacity Using a special design where the maximum number of balls are inserted into the bearing, they have more load capacity than standard radial bearings The race grooves are deeper on these bearings for more lateral support for the twisting and multiple forces associated with suspension pivots LLU seals give maximum protection against the elements, while keeping the 90% fill of Almagard Extra High Pressure Grease inside 90% filled with Mobilux NGLI 2 synthetic grease, dual-lip labyrinth seals, full complement of bearings, up to 45% increased load capacityItem SpecificationsBearing I D