Fibaro FGRGBW-101 Z-Wave RGBW Controller Model

A universal, Z-Wave compatible RGB/RGBW controller, the Fibaro RGBW Controller can control LED strips, RGB/RGBW LEDs and 12V-24V powered light sources. In addition, the device supports up to four 0V-10V analog sensors including temperature sensors, humidity sensors, wind sensors, air quality sensors and light sensors. All IN and OUT terminals may be user configured for LED control or 0V-10V signal readouts. May also be used as a dimmer with Halogen lamps. Power supply not included - LED strips, LED's, Low Voltage Lights and Relays.Features Controlled by Z-Wave controllers such as Fibaro Home Center, Vera &URC (Smarthings, Nexia &Indigo support coming soon) Most advanced device of its type in the world, scene capable and can control up to 4 LED strips Current and historical power consumption measurements. Microprocessor controlled. - SKU: RTL345376

The Fibaro Z-Wave RGBW Controller allows you to wirelessly select the perfect colors and lighting effects for your multicolor LEDs. The controller supports the three standard RGB channels plus a white light channel, giving you the power to create a limitless palette of colors. The RGBW controller also features basic dimming control for four LED channels, and even accepts up to four inputs from analog sensors. Controls LED, RGB/RGBW strips, halogens, and fans Dim/brighten four independent channels of 12/24V LED lights Supports up to four analog sensors (0V-10V) Reports active and historic power consumption Compatible with any Z-Wave controller Change Light Colors Based On Environmental Conditions When you connect external analog sensors to the RGBW Controller, you can program the controller to change your light’s color based on detected conditions. You can connect a wide variety of sensors, including temperature, light, humidity, flood and more. Monitor Power Consumption for Connected Lights The controller continually monitors the amount of energy consumed by your controlled lights. Each channel can be measured independently to give you a comprehensive assessment of energy usage. As a universal RGBW Z-Wave controller, the unit employs a PWM output signal to control wired LED, RGB/RGBW strips, halogens, and fans. The IN and OUT terminals can be set up for LED control or analog signal readouts. NOTE: Requires a Z-Wave network controller. Technical Details MPN: FGRGBW-101 UPC: 857934005157 Power Supply: 12/24VDC Rated Output Power: Single output channel: 6A All output channels combined: 12A PWM Output Frequency: 244 Hz Electricity Consumption: 0.3W Radio Signal Power: 1mW For Installation in Boxes: Ø≥50 mm Max Load (e.g. halogen bulbs): at 12V: 144W combined at 24V: 288W combined Radio Protocol: Z-Wave Radio Frequency: 908.4 MHz Wireless Range: 50 m outdoors, up to 30 m indoors (depending on terrain / building structure) Operational Temperature: 0 to 40 degrees C Dimensions: 42(L) x 37(W) x 17(H) mm Certifications: Z-Wave, ISO 9001, RoHS, FCC, CE Warranty: 12 Months