Fichiouy 8.5 Quart Autoclave High Pressure Steam Autoclave for Lab Culture Medium 110V Stainless Steel

Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual Notes 1. To ensure the normal operation of the sterilization pot, please place it on a solid horizontal surface. 2. Please make sure that the power supply specification is consistent with the power supply required by the equipment, and requires close grounding. 3. Please replenish the proper amount of water before each use to avoid burning out of the electric heating tube due to water shortage. 4. When using, it is recommended to tighten it diagonally to prevent leakage. 5. Please do not run for more than 30 minutes to avoid dry burning. 6. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Due to the penetrating effect of high temperature steam, items can be cleaned quickly and thoroughly, saving you time. With a capacity of 8L / 2.11Gal / 8.5Qt, you can sterilize a large number of items at once, saving you time and effort. The reinforced power cord connector is durable and safe. It also has an anti-dry burn feature. The machine automatically cuts off power when the water drops below a certain level, creating a safe experience for you. In addition, you don't have to worry about safety hazards as the safety valve will automatically vent when the unit is overpressurized. The lid of the pot is equipped with a self-expanding sealing ring and a reinforcing flange, which can keep the lid in a sealed state after tightening, which is safe, reliable and anti-penetration. The structure of the pot body consists of four layers, which can ensure more stable and even heating, so as to achieve better sterilization effect. Coal and electric heating modes are available for your convenience. We also equip you with a wing wrench whose ergonomic lever design allows you to open the lid of the pot easily and conveniently.