Gardner Bender HST-1300 Underground Feeder Cable Splice Kit - Quantity 1

For waterproof splicing of UF cables minimum No. 14/3, No. 12/2, maximum No. 8. Kit includes set screw splice connector and 8-inch x 1.3-inch diameter heavy wall heat-shrink tubing with watertight adhesive liner. Simply strip outside jacket and insulation from conductors, insert cable thru tubing, install conductors into connectors and tighten set screws. Center heat-shrink tubing over connector and heat tubing until it assumes the connector configuration. WARNING: This product can expose you to chemicals including DEHP which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov -

For UF cables minium #14/3, 12/2 Maximum #8/3 Kit includes set screw splice connector and one 8" x 1.3" diameter heavy wall polyolefin heat shrink tubing Contains one slotted set-screw splice connector and one 4" heavy-wall polyolefin heat shrinkable tube Rated at 600 volts maximum AWG 8 minimum to AWG 2 maximum Carded