Gas Powered Earth Auger Post Hole Digger Borer Fence Ground Drill Tool W/ Bits

Gas Powered Earth Auger Post Hole Digger Borer Fence Ground Drill Tool W/ Bits Description The hole digger is made of high-quality aluminum alloy and steel, which is strong and durable. It can make your digging work more efficient and effortless. The foldable design can save you lots of space and a rubber wheel facilitates the flexible movement. Meanwhile, the complete kit makes this product convenient for you to use. It's your ideal choice! Key Features Foldable Design: You can fold the bracket of this machine when not in use, saving you lots of space. Good Adaptability: It can be equipped with drill bits from 60-300mm/2.36-11.81inch in diameter, so you can install different sizes of drill bits according to your work requirements. Complete Kit: This product is complete in the package, including a hole digger, a fuel mixing bottle, a funnel, a drill bit, a tool bag, an English manual, and other tools. The tool bag allows you to put small accessories in it to avoid losing them, which is practical. Heat Dissipation Holes: There are heat dissipation holes on the engine, which can dissipate heat in time and prolong the service life of this product. Ergonomic Handles: The double handles are ergonomic and comfortable to hold, which can reduce the fatigue of your hands and arms, and provide you with a pleasant experience. Diaphragm Carburetor: It can realize multi-angle drilling and keep the state stable. Translucent Gas Tank: It allows you to easily see when fuel needs to be added. Waterproof Switch: The switch is designed to be waterproof, which can avoid switch failure in rainy days or after encountering water. Specification Model: HY-GD680-LK-881 Color: Red, Black Material: Aluminum Alloy, Steel Drill Bit Material: Manganese Steel, Tungsten Steel Alloy Wheel Material: Rubber Style: Modern Drill Bit Type: Double Helix Engine: Single Cylinder, 2-stroke Cooling System: Forced Air Cooling Starting System: Hand-pull Starter Clutch Type: Centrifugal Clutch Displacement: 63CC Power: 2.2KW (3HP) Maximum Rotation Speed: 8800±300rpm Gearbox Reduction Ratio: 30:1 Fuel Mixture Ratio: 25:1(Lead-free Gasoline: Two-stroke FC Grade Engine Oil ) Noise: 80-115dB Fuel Tank Volume:1200ml/50.72oz/1.2Qt Available Drill Bit Diameter: 60-300mm/2.36-11.81inch Gross Weight: 26kg/57lbs Drill Bit Diameter: 80mm/3inch Drill Bit Length: 80cm/31.49inch Product Overall Length: 1.8m/5.9ft Product Overall Height: 1.24m/4.06ft Handle Spacing: 47cm/18.5inch Package Size: 96*52.5*38cm/37*20*14inch How to Start the Machine Press the Oil Bubble: Press the oil bubble to supply oil before each startup. Push Up to Close the Damper: It is easier to start the machine when the damper is closed in a cold state. Pull the Handle: Pull it 5~8 times. When you hear the ignition sound of the machine, push the damper back. Push Down to Open the Damper: Pull the starting handle again for 1~3 times to start the damper normally. Package Included 1* Hole Digger 1* 80mm Drill Bit 1* Fuel Mixing Bottle 1* Funnel 1* Tool Bag 1* English Manual Other Accessories for Assembly Notes Please add gasoline and engine oil into the fuel tank respectively, cover the rear cover, and shake well. Please use two-stroke FC grade engine oil, otherwise, it will cause damage to the engine. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.

High Efficiency: The high power of 2.2KW (3HP), fast rotation speed (8800±300rpm), a drill bit with double helix and high hardness, and a two-stroke engine with stable operation can make your digging work easier. It can drill about 120 holes in an hour, saving you lots of time. Large Fuel Capacity: The fuel tank has a capacity of 1200ml/50.72oz/1.2Qt, which is large enough to avoid frequent refueling and can save you time. Flexible Movement: It is equipped with a rubber wheel with non-slip patterns and strong load-bearing capacity, allowing you to flexibly move this product with a good anti-slip effect. Shock Absorption: When encountering rocks, roots, and other obstacles during excavation, the throw-off type clutch can minimize the torque transmitted to users. The shock-absorbing rubber also allows for safe and smooth operation. Strong and Durable: This product is made of high-quality aluminum alloy and steel, which is wear-resistant, corrosion-resistant, and heat-resistant. Made of premium manganese steel and tungsten steel alloy, the drill bit has high strength and toughness, and can resist heat and deformation. Convenient to Operate: It has a simple hand-pull starter that makes it easy to start the machine by simply pulling it back. Then you just need to hold the two handles and push down to achieve digging, which can save you lots of time and effort.