Gas Powered Post Hole Digger 63cc 3hp Earth Auger Borer Ground Trolley 11" Drill

It Is Suitable for Fast Drilling into the Soil and Fine Sand. Specification Material: Iron Wheel Material: Rubber Displacement: 63cc Power: 2.2kw (3hp) Maximum Rotation Speed: 8800±300rpm Gearbox Reduction Ratio: 30:1 Fuel Mixture Ratio: 25:1（Gasoline: Two-stroke Fc Grade Engine Oil ） Noise: 80-115db Drill Bit Type: Single Blade Bit Fuel Tank Volume:1200ml/50.72oz/1.2qt Available Drill Bit Diameter: 60-300mm/2.36-11.81inch Engine: Single Cylinder, 2-Stroke Cooling System: Forced Air Cooling Starting System: Hand-pull Starter Clutch Type: Centrifugal Clutch Assembly Required: Yes Hole Digger Net Weight(Without Drill Bit): 16.25kg/35.83 lbs Hole Digger Gross Weight(Without Drill Bit): 18.85kg/41.56 lbs Hole Digger Package Size(Without Drill Bit): 79.5*38*33cm/31.3*14.96*12.99inch Drill Bit Net Weight: 5.5kg/12lbs Drill Bit Gross Weight: 6.01kg/13lbs Drill Bit Package Size: 82*31*31cm/32*12*12inch Drill Bit Diameter: 300mm/11inch Drill Bit Length: 80cm/31.49inch Product Overall Length: 166cm/65.35in Handle Spacing: 52.5cm/20.67in Package Included 1* Hole Digger 1* Drill Bit 1* Fuel Mixing Bottle 1* English Manual All Accessories for Assembly Notes 1. We Send the Hole Digger and Drill Bit Separately to Protect the Product from Damage During Transportation. Please Wait Patiently for All Parts to Arrive. 2. Please Add Gasoline and Engine Oil into the Fuel Tank Respectively, Cover the Rear Cover, and Shake Well. Please Use Two-stroke Fc Grade Engine Oil, Otherwise, It Will Cause Damage to the Engine. 3. Please Read the Manual Completely Before Installation and Use, and Pay Particular Attention to the Safety Instructions Included.

High Efficiency: the High Power of 2.2kw, Fast Rotation Speed (8800±300rpm), a Drill Bit with Single Blade and High Hardness, and a Two-stroke Engine with Stable Operation Can Make Your Digging Work Easier to save You Lots of Time. Large Fuel Capacity: the Large Fuel Tank (1200ml) Can Avoid Frequent Refueling and Can Improve Your Work Efficiency. Flexible Movement: It Is Equipped with a Rubber Wheel with Non-slip Patterns and Strong Load-bearing Capacity, Allowing You to Flexibly Move This Product with a Good Anti-slip Effect. Good Adaptability: It Can Be Equipped with Drill Bits from 60-300mm in Diameter, so You Can Install Different Sizes of Drill Bits According to Your Work Requirements. Convenient to Operate: It Has a Simple Hand-pull Starter That Makes It Easy to Start the Machine by Simply Pulling It Back. Then You Just Need to Hold the Two Handles and Push down to Achieve Digging, Even One Person Can Operate It Easily. Heat Dissipation Holes: the Heat Dissipation Holes on the Engine Can Dissipate Heat in Time and Prolong the Service Life of This Product. Ergonomic Handles: the Ergonomic Handles Can Reduce the Fatigue of Your Hands and Arms to Provide You with a Pleasant Experience. Translucent Gas Tank: It Allows You to Easily See When Fuel Needs to Be Added. Long Drill Bit: the 31.6 Inch Drill Bit Makes You Dig Deeper and It Is Long Enough to Make You save More Effort Without Bending Too down. Gearbox: It Has High Strength, High Hardness, and Good Sealing, Which Can Ensure the Hole Digger Works Stably with Low Noise.