INTSUPERMAI Electromagnetic Flowmeter Flange Connection Water Flow Meter Conducting Liquid Slurry DN125mm

Description: EMF5000 series integrated electromagnetic flowmeter is used to measure the volume flow of conductive liquid and slurry in closed pipelines, such as water, sewage, mud, pulp, various kinds of acid, alkali, salt solution, food slurry, etc. It is suitable for petroleum, chemical, electric power, mining and metallurgy, drainage, light industry, food and other industries. This electromagnetic flowmeter is the crystallization of years of experience in the field of flow meters, after years of continuous upgrading and improvement, its design and instrument quality control system to ensure the product's high precision and high reliability Adopt the world's latest technology.The advantages of rectangular wave magnetic field and the disadvantages of sinusoidal wave magnetic field are overcome by constant current low-frequency three-valued rectangular wave or double-frequency rectangular wave excitation.It can also eliminate the errors caused by voltage fluctuation, frequency change and impedance change of excitation coil.It has excellent zero point stability and is not affected by fluid noise.Thus the product has the characteristics of high reliability and stability. In addition, in this product, the excitation coil is designed with the characteristic of generating uneven magnetic field distribution, so that the sensor can be made small and lightweight, which can play a certain role in compensating the error caused by asymmetric flow. Parameter: Measure the diameter: 3.94inches Velocity range: 11.8-393.7inches/s Electrical conductivity: ≥5/μs/cm Accuracy of measurement: ±0.5%，±0.2%（Range specified section） Mechanical vibration frequency: ≤55Hz Protection grade: IP65、IP67、IP68 Explosion-proof grade: ExdIIBT4 Working power supply: 110VAC±15%，24VAC±5% Power consumption: ≤13W The storage time of power failure is displayed on site: In ten years The environment temperature: -25℃to+60℃ Relative humidity: 5%-95%RH The output signal: 4-20mA,0-5KHZ(Two simultaneous outputs)Communication interface: RS232，RS485（HART and Modbus are optional） Output distance between split type sensor and converter: It can set its own reality Positive and negative net flow: ≤7874inches The number of power loss records is set inside: 16 times Item included: 056368 INTSUPERMAI Electromagnetic Flowmeter Flange Connection Water Flow Meter Conducting Liquid Slurry DN125mm

Electromagnetic flowmeter has the advantages of simple structure,No rotary parts, So there is no friction, Long working life, High precision measurement, Reliable performance. The sensor measuring tube without throttle and choke component, Therefore, no additional pressure loss, No blocking problem, Suitable for measuring the containing suspended matter, Solid particles, Two phase flow fiber etc. (such as mud, sewage, slurry, pulp, and viscosity of the slurry). The signal is formed in the magnetic field in full space, It is the average cross section of the pipeline, Therefore thus electrode plane to the sensor upstream the end plane straight pipe section with relatively short, Length of 10 × D (D is the internal diameter of the tubes). Electromagnetic flowmeter without the mechanical inertia,Sensitive reaction, Measurement of instantaneous flow rate pulsation, Can also be instrument and unit, Computer matching the composition of a variety of automatic detection, Control system and control system. The output signal of the sensor is an exact linear relation with the average velocity of the electromotive force, And the measurement results and the temperature of the liquid, Pressure, density, viscosity, Conductivity (not less than the minimum conductivity) independent physical parameters, Such as water flow metering flowmeter calibration is also applicable to other media, No pressure loss without correction. Therefore, high measuring precision, reliable work.