Iron Pro 64k Fine Mesh Water Softener with Fleck 5600

64,000 grain capacity fine mesh resin softens water and removes iron to 16 gallons per minute with the 3/4" mechanical Fleck 5600 control head. The fine mesh resin enables the system to soften water as well as remove low to moderate levels of iron (up to 8ppm). Controlled by the Fleck 5600 control head, meter based regeneration meets demand, improving efficiency and reducing water and salt use while ensuring treated water that keeps up with demand.

64,000 grain capacity fine mesh resin softens water and removes iron to 16 gallons per minute with the 3/4" mechanical Fleck 5600 control head. The fine mesh resin enables the system to soften water as well as remove low to moderate levels of iron (up to 8ppm). Controlled by the Fleck 5600 control head, meter based regeneration meets demand, improving efficiency and reducing water and salt use while ensuring treated water that keeps up with demand. Product Features Complete System 12-inchx48-inch resin tank Riser tube with distributor basket 2 cubic feet fine mesh capacity resin Fleck 5600 Metered Control Head Choice of connection Standard Brine Tank with Safety Float On-Demand Flow meter measures water and regenerates based on water use, not time, conserving salt and water 64k (64,000) grain capacity Contains 2 cubic feet of fine resin capable of removing up to 64,000 grains of compensated hardness (hardness factoring in iron and manganese) between regeneration cycles Fine Mesh Resin Specifically designed for treatment of both ferrous (red water) and ferric (clear water) iron, up to a maximum of 8 ppm 16 GPM Service Flow Treats a maximum flow rate of 16 gallons per minute Removes Water Hardness Ion exchange process physically removes the ions that cause hard water Removes Iron Manganese Specially designed resin traps iron and manganense as well as the hardness Eliminates Scale Water that has been softened does not form scale buildup on faucets or fixtures or inside pipes Reduces Soap Use Soft water improves soap efficiency, reducing the amount required for dishes, laundry, and bathing. Fleck 5600 Control Head Low cost metered head provides efficient treatment at an economical price Structural USA Resin Tank Durable, high quality polyglass tank made by a trusted name it tank manufacturing Larger Round Brine Tank Used for holding salt used during the regeneration process. Measure approximately 18"x33" and holds approximately 300 lbs of salt DIY Installation Simple system connections and detailed installation instructions allow most homeowners to install this system themselves. For those who prefer to leave the work to a professional, most plumbers can install the system in 1-2 hours. Detailed Installation Instructions 5-Year Control Head Warranty 10-Year Tank Warranty Product Description Hard water causes a multitude of problems. Scale build-up restricts pipes, builds up on fixtures, and can degrade appliances. Hard water spots are also common on dishes and many other surfaces. The ions that comprise hard water attract soap molecules, requiring more soap to get the job done. This also causes an increase in soap scum and can prevent the removal of dirt and bacteria when bathing. Hard water has also been know to cause hair and skin to be brittle and dry. Iron causes rust buildup that causes appliances, fixtures, clothes, and even hair to turn a red-orange color. Manganese causes a black slime buildup, usually seen in toilet tanks and other areas where water is allowed to stand. Water softeners use an ion-exchange process to remove the ions that create hard water, eliminating hard water and the problems associated with it. Standard softening resin will only remove a small amount of clear water (ferrous) iron only. Fine mesh resin improves that capacity to a moderate level (8 ppm or less) of both clear water and red water (ferric) iron. Automatic regeneration initiated by a high quality Fleck metered head means high efficiency, consistent water treatment, and low maintenance. Treated water will extend the life of your appliances, reduce replacement costs, decrease soap requirements, and decrease the occurrence of soap scum. Softer hair and skin are also common when using water that has been treated. Controlled by the low cost Fleck 5600, this system provides durability and