JBL 104SET-BTW Pair Bluetooth Powered Active Studio Monitors+Isolation Feet Pads

Package Includes: (1) JBL 104SET-BTW Pair Compact Powered Active Studio Reference Monitors Bluetooth (8) Rockville ISOPAD Aluminum/Silicone Isolation Pad Feet 4 Speakers/Studio Monitors Features: Proprietary coaxial driver combines 4.5-inch (118 mm) woofer and .75-inch (19 mm) soft-dome tweeter for transparency and wide sweet spot Reference mixes via Bluetooth 5.0 streaming Integrated 60-watt Class D power amplifier; 30 watts distributed to each speaker Acoustically optimized for desktop placement Molded ABS cabinet with contoured low-frequency port Three sets of inputs allow connection with professional equipment, personal music players and consumer devices Master monitor includes electronics for the extension monitor, minimizing wiring and clutter Front-panel input control selects Bluetooth, Aux, RCA, TRS or combines all inputs Front-panel volume control and headphone jack with speaker mute feature Included Accessories: Extension monitor speaker wire (2-conductor, 2 meters) 3.5 mm to RCA audio cable Regional power cable Quick setup guide Specifications: System input type: bluetooth, 1/8" aux, rca, 1/4" trs balanced Input selection options: bluetooth, aux, rca, trs, all System output type: 1/8" stereo headphone with auto speaker mute Bluetooth version: 5.0 LF transducer: 4.5 in (118 mm) HF transducer: 0.75 in (19 mm), soft dome Enclosure type: ported Crossover: 1725 hz, 1st order Power amp: 60 w (30 w each speaker), class d Sensitivity: 87 db spl @ 1 m with -10 dbv aux in (volume = max) Maximum continuous spl*: 89 db System peak spl*: 102 db (pink noise, 12 db crest factor) Maximum spl, momentary peak*: 104 db Maximum peak input level(-10 dbv / +4 dbu): +6 dbv / +20.3 dbu Frequency range (-3 db spl)**: 88 hz – 20 khz Frequency range (-10 db spl)**: 60 hz – 20 khz System rated impedance: 8 ω Minimum impedance: 7.8 ω @ 260 hz Cabinet tuning frequency: 72 hz System power handling: 30 w x 2 @ 100 hours, iec/sms System distortion criteria: <10% thd at maximum output with full compressor / limiter engagement Electrical distortion criteria: <0.2%thd @ 1 khz, 2.83 vrms output <1% thd @ 1 khz, full rated output Signal to noise ratio: 75 dba (a-weighted), 70 dbr (unweighted), relative to 2.83 vrms output on hf Coverage (horizontal x vertical): 120º x 60º System polarity: eia Acoustic test specification: ats# 1000340443 AC input voltage: 100 - 240 vac (±10%), 50 / 60 hz Current draw: 85 watts All About and how to use your ISOPADS: Features: Rockville ISOPAD Aluminum/Silicone Isolation Pad Feet For Speakers/Studio Monitors Material: Aluminum body with silicone on top and bot

Features: Proprietary coaxial driver combines 4.5-inch (118mm) woofer and .75-inch (19 mm) soft-dome. tweeter for transparency and wide sweet spot. Reference mixes via Bluetooth 5.0 streaming. Integrated 60-watt Class D power amplifier; 30watts distributed to each speaker. Acoustically optimized for desktop placement. Molded ABS cabinet with contoured low-frequencyport. Three sets of inputs allow connection withprofessional equipment, personal music playersand consumer devices Master monitor includes electronics for theextension monitor, minimizing wiring and clutter. Front-panel input control selects Bluetooth, Aux,RCA, TRS or combines all inputs. Front-panel volume control and headphone jackwith speaker mute feature. Included Accessories: Extension monitor speaker wire (2-conductor, 2 meters). 3.5 mm to RCA audio cable. Regional power cable. Quick setup guide. System input type: bluetooth, 1/8" aux, rca, 1/4" trs balanced Input selection options: bluetooth, aux, rca, trs, all. System output type: 1/8" stereo headphone with auto speaker mute. Bluetooth version: 5.0. LFtransducer: 4.5 in (118 mm). HF transducer: 0.75 in (19 mm), soft dome. Enclosure type: ported. Crossover: 1725 hz, 1st order. Power amp: 60 w (30 w each speaker), class d. Sensitivity: 87 db spl @ 1 m with -10 dbv aux in (volume = max). Maximum continuous spl*: 89 db. System peak spl*: 102 db (pink noise, 12 db crest factor) Maximum spl, momentary peak*: 104 db. Maximum peak input level(-10 dbv / +4 dbu): +6 dbv / +20.3 dbu. Frequency range (-3 db spl)**: 88 hz 20 khz. Frequency range (-10 db spl)**: 60 hz 20 khz. System rated impedance: 8 ?. Minimum impedance: 7.8 ? @ 260 hz. Cabinet tuning frequency: 72 hz. System power handling: 30 w x 2 @ 100 hours, iec/sms. System distortion criteria: <10% thd at maximum output with full compressor / limiter engagement Electrical distortion criteria:<0.2%thd @ 1 khz, 2.83 vrms output<1% thd @ 1 khz, full rated output. Signal to noise ratio: 75 dba (a-weighted), 70 dbr (unweighted), relative to 2.83 vrms output on hf. Coverage (horizontal x vertical): 120 x 60. System polarity: eia. Acoustic test specification: ats# 1000340443. AC input voltage: 100 240 vac (10%), 50 / 60 hz. Current draw: 85 watts. Electrical current draw (w) idle 100 / 240 vac: 3.52 / 3.70