KEKAFU Replacement Tens Electrode Pads 2X2 Muscle Stimulatorbulk-10PCS

10- Packs of 4 electrode per pack = 40 electrodesReusable Multi-stick GelMolded wire connector for reliability and durabilityFor use with most TENS unit, TENS 7000, TENS 3000, TwinsStim, Massager and electrical muscle stimulators Directions:Apply only to unbroken skinClean and dry the area to which the TENS Electrodes are to be applied with soap and water prior to application of the Electrode Pads.Plug the lead wire into the Pin Connector on the pre-wired electrode pad.To apply to the skin:remove the protective liner from the TENS Electrode and apply to the prescribed location. To remove Lift the corner of the electrode pad and peel holding both the back of the TENS Electrode and the edge of the adhesive. Replace Pads onto the plastic and replace and seal the plastic bag.. Note : When removing the pads do not pull from wires , pull off from the corner..Pads will last longer if area is cleaned before they are put on...Oils and or dirt from the skin cause pads to not to stick ... A small amount of water can help if pads are dry ...

Replacement Tens Electrode Pads 2X2 Muscle Stimulatorbulk-10PCS Color: White Size: 10PCS Material: Others Note: 1. Due To The Difference Between Different Monitors, The Picture May Not Reflect The Actual Color of The Item. 2. Please Be Reminded That Due to Lighting Effects and Monitor's Brightness/Contrast Settings etc, The Color Tone of The Photo and The Actual Item Could Be Slightly Different