Kenwood eXcelon KFC-XW1241 12" 2000W Subwoofer

Kenwood Excelon KFC-XW1241 Excelon Series 12" 4-Ohm Component Subwoofer The KFC-XW1241 sub features a two-piece polypropylene cone with with Kenwood's X-Motif design and patterned surface for added rigidity, so you'll get maximum performance with minimal distortion. The sub handles up to 300 watts RMS and works in sealed or ported enclosures as small as 1.25 cubic feet. The CA-121G steel-mesh grille (sold separately) protects your speaker from accidental damage. When you're looking for the impact you need for all kinds of music, this sub is ready to rock. Product Highlights: 12" 4-ohm component subwoofer 2-piece polypropylene cone with rubber surround Grille sold separately Power handling: 300 watts RMS (2000 watts peak) Frequency response: 29-300 Hz Mounting depth: 5-3/8" Sealed box volume: 1.25 cubic feet Ported box volume: 1.5 cubic feet Warranty: 2 years Our 30-day money-back guarantee MFR # KFC-XW1241 Sealed Enclosure Applications: Kenwood recommends a sealed enclosure volume of 1.25 ft³ (0.8 ft³ to 1.8 ft³ acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable for all types of music. Ported Enclosure Applications: Kenwood recommends a ported enclosure volume of 1.5 ft³ (1.2 ft³ to 2 ft³ acceptable) with a 12¾" wide x 1⅜" tall x 29" long slot port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. However, this efficiency comes at the expense of very low frequency output. Spring Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10-gauge. What's In The Box: Kenwood Excelon KFC-XW1241 owner's manual One 12" Subwoofer Trim ring Connection guide Template on box lid Specs printed on the box

12” Entry Class Subwoofer Polypropylene Cone with Diamond Array Pattern Stress-Controlled Spider 300W RMS, 2000W Peak Power Freq. Response 29Hz-300Hz 4Ω Impedance Mounting Depth 5-3/8”