Klipsch R-15PM Stereo Speakers & Pro-Ject Primary Turntable Pack

Enjoy audiophile-quality sound from your vinyl records with the Klipsch R-15PM Stereo Speakers & Pro-Ject Primary Turntable Pack. The turntable supports 33 1/3 and 45 rpm records and includes a low-distortion cartridge on the aluminum tonearm. The speakers feature a built-in pre-amp for simple connectivity. These speakers incorporate a 5.25" woofer and 1" tweeter in each with a 50W per channel power rating. The speakers have Bluetooth connectivity to allow for wireless streaming from your compatible smartphone or tablet. If you prefer wired connections, you can make use of the RCA analog, optical, and 1/8" audio inputs. They also have a USB input to connect directly to your computer. A dual RCA cable, USB Type-A to USB Type-B cable, speaker wire, and IR remote are included.

Experience High-Fidelity Sound No receiver required. Just add vinyl. The R-15PM powered speakers with built-in phono pre-amp are matched to the custom Klipsch Pro-Ject Primary turntable to deliver room-filling sound without the hassle of setting up mounds of equipment. The Speakers The sound comes from a true two-way speaker with Klipsch's 90 x 90° Linear Travel Suspension (LTS) Tractrix horn, rigid Injection Molded Graphite (IMG) woofer, and tuned rear-firing bass port. All of this is powered by a Klipsch-customized and fully integrated high-resolution amplifier, with a multitude of connections. Add subwoofer to taste. Use the included remote to do everything else. The Turntable The Pro-Ject Primary turntable is hand-crafted and designed to extract every last detail from the vinyl grooves of your favorite LPs. It packs a low-vibration synchronous AC motor, a matched 8.6" aluminum tone-arm, and a low-distortion Ortofon OM 5e magnetic cartridge. The Setup No pre-amp required, no receiver needed, and no need to mess with counterweights or skating adjustments. Find a wall outlet, setup the turntable and speakers, plug them in, and flip the switch: you're ready to rock. Turntable Speeds 33 1/3, 45 rpm Motor Low-vibration synchronous AC motor, DC-driven AC motor control Drive Mechanism Belt-drive with silicon belt Cartridge Ortofon OM 5E magnetic Turntable Stylus 20 ?m/mN - elliptical Tone Arm Aluminum, custom matched to Ortofon OM 5E cartridge Effective Arm Length 8.6" (21.8 cm) Signal to Noise Ratio 65 dB Turntable Wow and Flutter 33 1/3 rpm: 0.14% 45 rpm: 0.13% Power Output 4 mV Connectors 1 x Stereo RCA output Power Requirements 15 VDC, 500 mA Turntable Power Consumption 4.5 W Dimensions (W x H x D) 16.5 x 4.4 x 13" (42 x 11.2 x 33 cm) Weight 8.8 lb (4 kg) Speakers Speaker Design Bass-reflex via rear-firing port Drivers 1 x 5.25" (13.30 cm) Copper spun, magnetically shielded IMG woofer, per speaker 1 x 1.00" (2.54 cm) Aluminum diaphragm compression tweeter mated to a 90 x 90° square Tractrix horn, per speaker Speakers Amplifier Output 50 W per channel Enclosure Material MDF (Medium Density Fiberboard) Crossover Frequency 1800 Hz Speakers Frequency Response 62 Hz to 24 kHz, ±3 dB Low Frequency Extension 54 Hz Speakers Input Connectors Right Speaker: 1 x RCA L/R pair phono level with Phono/Line switch (phono preamp with ground screw terminal) 1 x USB digital audio from computer 1 x Digital optical 1 x 1/8" (3.5 mm) mini jack line level 1 x AC input Left Speaker: 1 x Binding post pair from right speaker Speakers Output Connectors Right Speaker: 1 x RCA line level connection to subwoofer 1 x Binding post pair to left speaker Speakers Wireless Connectivity Bluetooth Magnetic Shielding Yes Finish Brushed black polymer veneer Speakers Dimensions (W x H x D) Each Speaker: 7 x 12.5 x 8.11" (17.8 x 31.8 x 20.6 cm) Package Weight 43.0 lb Box Dimensions (LxWxH) 22.5 x 20.3 x 17.0"