LASER MARKING POWDER-Metals Marking - CO2 Laser - Fiber Laser - YAG, 100% Satisfaction Guarantee, Durable, Permanent, High Contrast, Brilliance Laser Inks - BLI101MBPWD - 50 Grams(FOAM BRUSH INCLUDED)

HIGH QUALITY BLACK MARK-BLI101MBPWD50 is a general purpose laser marking black ink to create high quality permanent black mark on variety of different metals.This is an exceptionally adaptable product and is recommended for almost any metal.Dries Quickly.Best results if marked shortly after application when dry.Extremely easy to wash off after laser marking.Please inquire/search (Laser Metal Spray CO2" if Spray Cans ink is required.Apply quick and easy just like a paint can, no special training required.Coverage (25%more than Competition)

✅ 100% SATISFACTION GUARANTEE OR MONEY BACK:Settings and marking techniques may vary depending on the laser and metal product being marked. We can usually resolve most marking issues with simple setting adjustments. Please feel free to contact us directly. ✅ FOAM BRUSH INCLUDED: Add denatured alcohol or similar RATIO 1:1. Mix/Shake well, Use foam brush to apply on the substrate surface, apply a thin coat using left to right motion, as long as you do not see through the surface.Use the suggested laser settings in our FAQ section as a starting guide line or feel free call our Technical Support Team. ✅ AIR BRUSH or SPRAY-GUN APPLICATION: Add denatured alcohol or similar. RATIO 1:2 or 1:3. Mix/Shake well before spray. ✅ GENERAL GUIDELINES ✅ SETTINGS: Scan QR CODE on product label to see our suggested laser settings in our FAQ section of our website. CO2 LASER - 25 Watt Minimum Required (100% P / 15-30% S / 500-700 DPI). FIBER LASER - 10 Watt Minimum Required (@ 10 Watt PWR / 50 mm/sec / 80-500 Q-Freq. / DPI- 0.1mm Hatch) Low watt Diode Lasers are not recommended. ✅ DRIES QUICKLY ✅ NO WAIT REQUIREMENT: To further speed up the process use hair dryer or heat gun to dry within seconds.