Leviton 05821-0IS 05821-0Is 20 Amps 250 V Single Ivory Outlet 6-20R

Leviton single receptacle, 2 poles, 3 wires, 14 - 10 AWG wire, 20 a, 125 vac, NEMA 6-20r, Grounding, 2000 vac dielectric strength, 4.06 in overall length, 1.38 in overall width, 1.06 in overall depth, thermoplastic, Brown, -40 to 60 deg c, UL 498 E13399, CSA C22.2 no. 42 52105, ansi c-73, Nom 057, 2 hp, for commercial applications. Leviton single receptacle, 2 poles, 3 wires, 14 - 10 AWG wire, 20 a, 125 vac, NEMA 6-20r, Grounding, 2000 vac dielectric strength, 4.06 in overall length, 1.38 in overall width, 1.06 in overall depth, thermoplastic, Brown, -40 to 60 deg c, UL 498 E13399, CSA C22.2 no. 42 52105, ansi c-73, Nom 057, 2 hp, for commercial applications. Leviton 106-05821-ISP Single Receptacle Electrical Power Outlet 20-Amp 250-Volt, 1-pack, Ivory. Leviton's commercial receptacles are manufactured to withstand the demands of commercial and institutional applications. This commercial receptacle provides long-lasting service life and is a cost-saving alternative to the industrial devices. This side wired 20-Amp 250-Volt unit has large-head terminal screws, backed out and staked to accept No.10 copper or copper-clad wire. All power contacts are triple wipe for maximum conductivity and plug retention. It has a heavy-gauge, rust-resistant, steel mounting strap, a shallow design for maximum wiring room in the box. It has convenient washer-type break-off plaster ears for best flush alignment, with captive mounting screws for fast installation. It is UL listed 498, CSA certified, NOM certified, meets or exceeds NEMA WD-1 and WD-6 and ANSI standards and is backed by limited 10-year warranty.

All power contacts are triple wipe for maximum conductivity and plug retention Large-head terminals screws are backed out and staked to accept No. 10 copper or copper-clad wire Built with a heavy-gauge, rust-resistant steel mounting strap Shallow design for maximum wiring room in box Built with captive mounting screws for fast installation. Total Outlet: 1