Linear DXS Supervised PIR Motion Detector Transmitter (SST00074/DXS-54)

The Linear Supervised Passive Infrared Motion Detector Transmitter is a battery powered passive infrared motion detector with a built-in transmitter designed for use with Linear's DXS and DX format receivers. This transmitter can be used in a variety of motion detection applications. When the passive infrared sensor detects motion in its field of view, the transmitter sends a digitally coded wireless signal to its companion receiver. The digital DXS code format features over a million possible codes. DXS transmitters are precoded at the factory to unique codes, so no field coding is required. The transmitter can send three different signals: alarm, low battery and status. The unit is powered from a 9-Volt alkaline battery with a battery life up to three years depending on the monitored area's traffic. When the battery gets low, the test indicator flashes and sends a low battery signal to the receiver when the detector senses motion. Approximately every hour, the transmitter sends a status transmission to the receiver. This hourly signal updates the receiver to the transmitter's condition. By monitoring status transmissions, the receiver can determine if a transmitter has a low battery or has been removed from the system.

Passive infrared motion detector with a built-in transmitter For use with Linear's DXS and DX format receivers Alarm, supervisory and low battery transmissions Battery saver circuitry Battery included