Loctite LOC2203452 518 Gasket Maker Flange Sealant

Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces. Features Fills gaps up to 0.050-Inch/1.27 mm and forms a flexible, solvent resistant seal that will not tear or decay Forms a flexible, solvent resistant seal that will not tear or decaySpecifications Product type: Flange Sealant - SKU: MTRST162922

RELIABLE ADHESION. Forms a flexible, solvent-resistant seal that will not tear or decay. Primarily for use on aluminum, iron & steel flanged mating surfaces. FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Typically used for Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement. REMOVABLE WITH HAND TOOLS. Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife. CONVENIENT CURING. 30 minutes to 4 hours with primer. 4 - 24 hours without primer. Cure speed will depend on the substrate used. LOCTITE 518 GASKET MAKER replaces almost any cut gasket or coat pre-cut gaskets to increase reliability.