MIDUO 16 GPM Hydraulic Log Splitter Pump for Presses Log Splitters Clamping Units NEW

Specifications: -New Hydraulic Log Splitter Pump 16 GPM -Shaft: ?" -Inlet port: 150mm -Outlet port: 230mm -Minimum 8 HP or larger gas engine. -For use with open center hydraulic systems only -Maximum pressure: 3000 PSI -Bolt circle: 2.83in. -4 holes spaced 2" on center -Mounting hole diameter: 344in -Woodruff key: 1/8in -Suggested applications: Presses, Log Splitters, Clamping Units and Compacto -Rotation is clockwise Description: ?This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient. ?The HI/LO section of the pump is all aluminum and the end plates are cast steel. ?Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Packing Include: -1 PC 16 GPM Hydraulic Log Splitter Pump

This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements