Moobody 35MHz~4400MHz OLED Display RF Signal Generator ADF4351 Module Sweeps Frequency Generator PLL

This RF signal generator adopt metal-shielded RF circuits, with four-layer Printed circuit board process, digital circuit and ana-log circuit separation, also has brightness OLED display, give you a better using experience. Come on and enjoy it, it will not let you down. Features: The main control adopts STM32F103C8T6, fractional N divider frequency synthesizer and integer N divider frequency synthesizer PLL-ADF4351 PLL. The output frequency ran-ge is 35MHz~4400MHz, the main board adopts four-layer gold precipitation process, fine component selection, classic layout and wiring printed circuit board design, making the signal output extremely stable, phase noise to meet the official design requirements. On-board 25MHz active SiTime crystal oscillator, and reserved external clock interface, MCU ADC interface. Simple five-key operation design, clear logic, can set the point frequency, sw-eep mode output, sw-eep frequency step and sw-eep cycle can be adjusted. Programmable SiTime crystal oscillator, reserved for external clock. Five-way navigation button, easy to operate, and with CH340C serial chip, serial communication and firmware download can be realized. Specifications: Material: Printed circuit board Bandwidth: 35MHz~4.4GHz (35MHz~4400MHz) Dual channel differential output Out -& Out + Module step: 100KHz (minimum) Frequency error: ±1KHz Module phase noise: better than -100dBc at 10KHz (noise varies with the frequency band phase) Module output power: 10dBm (maximum) Programmable 1/2/4/8/16/32/64 divider output Typical RMS jitter: 0.3ps RMS VM: 0.4% (typical, 2.1 GHz) Battery: 1 * lithium battery, 2000mAh (included) Package size: 155 * 101 * 40mm / 6.1 * 4.0 * 1.6in Package weight: 83g / 2.9ounce Packing list: 1 * Set of Signal Generator Module (Include Battery)

The main control adopts STM32F103C8T6, fractional N divider frequency synthesizer and integer N divider frequency synthesizer PLL-ADF4351 PLL. The output frequency ran-ge is 35MHz~4400MHz, the main board adopts four-layer gold precipitation process, finecomponent selection, classic layout and wiring printed circuit boarddesign, making the signal output extremely stable, phase noise to meet