Nanoskin Ultra Line Ceramic Boost 1 Gallon – DIY Ceramic SiO2 Spray Sealant (Safe for All Finishes and Ceramic Coatings) | Proprietary (Nano SiO2) Formula | Cars, Trucks, Boats, Bikes, ATV, RV, Glass

Nanoskin ULTRA LINE, CERAMIC BOOST is a silica based quick detailer sealant packed with glass-like gloss, water beading and dirt repellent protection. Originally formulated to maintain the protection and finish quality of ceramic coatings, CERAMIC BOOST is also a stand-alone spray-on, wipe-off sealant, where it can offer up to 6 months of protection on daily drivers. Its water based micro-emulsion formula can be applied to all exterior surfaces, and even on damp surfaces, making it perfect for quickly topping up your vehicle's protection and shine. CERAMIC BOOST also has excellent hydrophobic properties. Not only does it bead water incredibly well, it will repel water from the surface, making it more difficult for dirt, mud, and other road grime to stick to the surface and allowing for easier maintenance and cleanup as well. CERAMIC BOOST is very easy to use and ideal for enthusiasts or professionals. It keeps your paint clean longer, makes washing the car easier, and allows you to dry it faster! Note: CERAMIC BOOST will continue to cure for up to 24 hours. Tips: This product will work best on a clayed and polished surface that has already been treated with ceramic coatings. Work quickly if using in direct sun to avoid streaks or spotting. Do not use this product as clay lubricant. DIRECTIONS: 1. Thoroughly wash the surface, rinse and dry. 2. Spray CERAMIC BOOST over a panel to be treated. 3. Using a clean dry microfiber towel, spread evenly over surface. 4. Flip the towel over or use a second towel to light buff away residue. 5. Repeat for most exterior surfaces "“ paint, glass, chrome and trim. NOTE: This product has a curing time of up to 24 hours without attention.

✅ ADVANCED SILICA PROTECTION: Advanced ceramic silica SiO2 infused detail spray. Contains some of the highest levels of SiO2 on the market. Rejuvenate ceramic coated surfaces, or non-coated surfaces as stand alone sealant. Use on paint, glass, chrome, and trims. ✅ BEAD & REPEL WATER: Recharge dead & aged ceramic SiO2 coatings and bring back hydrophobic and water beading properties in just one spray. For non-coated surfaces, you can apply SiO2 with this simple to use formula. Stack applications for even higher levels of gloss and protection. ✅ BOOST HYDROPHOBIC PROPERTIES: High levels of ceramic SiO2 chemistry give Ceramic Boost unequalled water beading and hydrophobic properties. Water does not stand a chance against the protection and "coating" Ceramic boost imparts to glass, paint, chrome, and plastic. ✅ 3-6 MONTHS PROTECTION: Due to its high level of SiO2 content, CERAMIC BOOST lasts 3-6 months not weeks. SiO2 ceramic application has never been easier. Get that glass and coat in a simple spray and wipe. **Pro tip: Use in conjunction with Nanoskin CRYSTAL WASH for additional SiO2 boosting during washes! ✅ EASY TO USE SPRAY-ON: The RTU "ready to use" formula is easy to use. Spray and wipe without stubborn residue and repeated wiping. Truly a one towel application! A little CERAMIC BOOST goes a long way.