Oatey Roof Vent Flashing,1-1/2in. to 3in. 11871

Roof Vent Pipe Flashing, Base Shape Rectangular, Base Material Steel, Cap/Collar Material Rubber, Material Thickness 28 ga, For Roof Angle 40 Degrees , For Number of Pipes 1, For Maximum Pipe Size 3 in, For Minimum Pipe Size 1 1/4 in, Base Height 14 1/2 in, Base Width 11 in, Base Diameter Not Applicable, Seal Material Rubber, Top Opening Open, Application Pipe Vents, Product Type All-Flash No Calk, UV Protected Yes, For Roof Type Pitched, Standards IAPMO (UPC), NES 653

Self sealing collar seals around 1-1/2 in. to 3 in. vent pipe, no caulk needed Not for hot-mopped or built-up roofs Self-sealing collar slides over pipe and requires no caulking Do not use petroleum based products or paint on flashing collar or plastic base Metal base for pitch from 0-40 degree and plastic base for pitch from 0-45 degree Rated 180 degree F continuous heat and approved for Type B installations Allows use on multiple pipe sizes with choice of aluminum, copper, galvanized or thermoplastic base Number in Package: 12 pk Shape: Square Flashing Type: All-Flash Fits: Self sealing collar seals around 1-1/2" to 3" vent pipe Height: 1-1/2 to 3 in. Color: Silver Material: Galvanized Steel Product Type: Roof Flashing Width: 11 in. Length: 14-1/2 in. Sub Brand: All-Flash Brand Name: Oatey Fits: Self sealing collar seals around 1-1/2 inch to 3 inch vent pipe Shape: Rectangle Number in Package: 1 pk Flashing Type: Roof Product Type: Flashing Height: 3 in.