Oukaning 13 GPM 1/2" Pump Shaft Hydraulic Log Splitter Pump 2 Stage Hi/Lo Gear Pump

The 2-stage pump can give you faster cycle times and higher possible pressure with a small engine. Excellent for use on log splitters. 85percent efficient. Suggested applications: Presses, Log Splitters, Clamping Units and Compacto Specifications: New Hydraulic Log Splitter Pump 13 GPM Shaft: ½" Inlet port: 150mm Outlet port: 230mm Minimum 8 HP or larger gas engine. For use with open center hydraulic systems only Maximum pressure: 3000 PSI Bolt circle: 2.83in. 4 holes spaced 2" on center Mounting hole diameter: 344in Woodruff key: 1/8in Rotation is clockwise This 2 stage pump can give you much faster cycle times and higher possible pressures with a small engine. Excellent for use on log splitters. 85% efficient. The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Packing Include: 1 PC 13 GPM Hydraulic Log Splitter Pump

13GPM Powerful Pump: This hydraulic log splitter pump features a 3600 RPM max rotating speed, 3000PSI max operating pressure along with a 13GPM high flow rate. It will bring powerful performance to your log splitter. Get ready to start cutting logs in half, in half the time. 1" Inlet & 1/2" NPT Outlet: Our 13 gpm hydraulic log splitter pump is equipped with a standard 1/2" NPT outlet port and 1" barb on the inlet port. It also has a 1/2" diameter shaft with a 1/8" Woodruff key measure, allowing it to rotate clockwise. Quality you can trust, for unmatched results you can see. Sturdy ＆ Durable: The HI/LO section of the pump is all aluminum and the end plates are cast steel. Applications for the HI/LO pump are log splitters, presses etc where rapid movement of the cylinder at low pressure is required prior to automatically switching to the high pressure mode to meet load requirements. Simple Installation: This hydraulic log splitter pump stands out with a 4-hole bolt-on design, and it allows for a direct and quick installation. Install the pump effortlessly, making your log splitting more effective and robust. Doesn't Just Split Logs: The 2-stage hydraulic pump for log splitter gas is excellent for log splitters, press, machine tools, and power units for snowplows. It has outstanding compatibility with many OEMs.