Oukaning 52cc Single Cylinder Gas Powered Earth Auger Power Engine Post Hole Digger

Application It can be drilled in epidermal turf and clay, and can be used for tree planting holes, fence stakes, greenhouse stakes, fiber optic cable pole stakes, tree fertilization stakes, etc. Starting Method 1. Turn on the switch. 2. Before each start, press the oil bubble to suction oil into the oil pipe. 3. When the cold machine starts, close the damper switch first. 4. When ignition is heard, pull the start handle 5-8 times. 5. Open the damper switch. Drill Installation Steps 1. Connect the drive shaft. 2. Insert the bolt. 3. Put the pin to lock it. Specification Material: PP, Steel, Rubber, Aluminum, Iron, Carbon Steel Color: Orange, Black Engine Type: Single Cylinder, 2-stroke, Air-cooled Displacement: 52cc Mixed Fuel: Gasoline:Two-stroke Oil (25:1) Ignition System: C.D.I. Power: About 1.7kw Horsepower: 2.3hp Fuel Tank Capacity: 1.2L/0.3gal Speed: 6500-8500r/min No-load Speed: 2800-3200r/min Fuel Consumption: 610g/kw·h Drill Diameter: 10cm/3.9inch, 15cm/5.9inch, 20cm/7.9inch Drill Length: 75cm/30inch Shaft Size: 2*5cm/0.8*2inch Engine Size: 22.5*22*15cm/8.9*8.7*6inch Digger Whole Size: 50*23cm/20*9inch Extension Bar Length: 30cm/11.8inch Digger Package Size: 35*28.5*29cm/13.8*11.2*11.4inch Drill Package Size: 80.5*22*33cm/31.7*8.7*13inch Digger Gross Weight: 9kg/20lbs Digger Net Weight: 8.1kg/18lbs Drill Gross Weight: 9.5kg/21 lbs Drill Net Weight: 7.35kg/16.2lbs Package Included 1 x Auger Post Hole Digger 1 x Extension Bar 3 x Drills 1 x Fuel Oil Mixing Bottle 1 x Funnel 1 x Spare Starter 1 Pair x Goggles 1 x English Manual Tool Kit for Assembly Notes 1. The tank should be filled with a mixture of oil (gasoline: two-stroke oil = 25: 1). It should be used with two-stroke oil rather than four-stroke oil, otherwise accidents will occur. All oils are excluded. 2. Please start the machine by pulling the starter quickly without stopping in the middle. 3. Press the oil bubble a few more times before starting. If there is oil coming in and out of the fuel line, which means oil has been supplied. 4. Do not use on steep slopes exceeding 15°. 5. Please do not drill ice, frozen soil, sandy clay, and sand and gravel mixed soil, or the drill bit will bend easily. 6. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.

Low Fuel Consumption: The high-quality carburetor fully burns the fuel so that the energy can be fully converted and fuel consumption is only 610g/kw·h, saving you money on fuel. Good Heat Dissipation: The heat dissipation holes on the engine can effectively dissipate heat to ensure stable operation, reduce noise, and prolong the service life of the machine. Easy to Control: The on/off button and smooth manual starter make it simple to use, so even novices can master it quickly. The digging speed can be adjusted at will by adjusting the force of pressing the throttle switch on the grip to suit different soil conditions. Smooth Running: A smoothly rotating iron shaft and enlarged deepened cylinder make it more stable and less noisy when digging holes for a better user experience. Low Fuel Consumption: The high-quality carburetor fully burns the fuel so that the energy can be fully converted and fuel consumption is only 610g/kw·h, saving you money on fuel.