Porta-Nails 41801 L Head Hardwood Flooring Nails, 1-1/4-Inch by 18 Gauge

From the ManufacturerPNI's 1-1/4 In. 18 gauge L Head Flooring nail is for use with PNI's 418A Portamatic Evolution and with all brands of nailers using an 18 ga L Flooring nail /cleat. The 1-1/4 In. nail is recommended for use with 3/8 In. to 1/2 In. engineered, bamboo and solid hardwood floors. The 18 gauge nail is a thinner than the traditional 16 gauge nail and is effective in reducing the splitting of tongues on vertical and horizontal grain bamboo and exotic hardwoods. Our nail has sharp serrated edges to bite into the flooring and a blunt tip to help reduce the risk of slitting the hardwoods. The nails are collated with tape and are packed 2000 per pack. Each pack will cover approximately 200 sq ft of 2-1/4 In. and 350 sq ft of 3-1/4 In. flooring when following a nailing schedule of 6 to 8 inches. Our nails are produced with the finest material and will hold up for the life of the floor. PNI # 41802 nail is available in a 1-1/2 In. length for 5/8 In. floors. Bamboo, engineered and thinner exotic flooring may require an 18 gauge nail to reduce the risk of splitting, delaminating and dimpling. Always follow the flooring manufactures recommendation for the length and thickness of the fastener to be used on your flooring. We are members of the National Wood Flooring Association and will answer your installation and applications questions. Trust your flooring project to a company that knows hardwood flooring.

QEP1206: Features: -Flooring nail. -Material: steel. -Collated tape for holding nails together and eliminating waste due to breakup. -18 Gauge to reduce splitting of hardwood flooring tongues. Product Type: -Nails. Generic Specifications: -Covers approximately 200 sq. ft. of 2.25 flooring or about 350 sq. ft. of 3.25 flooring. Generic Dimensions: -0.25'' H x 0.03'' W x 1.25'' D, 0.001 lb. Dimensions: Overall Length - Top to Bottom: -0.25 Inches. Overall Width - Side to Side: -0.03 Inches. Overall Product Weight: -0 Pounds.